Part of Slepp's Projects — Pastebin — TURL — Imagebin — Filebin
Feedback -- English French German Japanese
Create Upload Newest Tools Donate

Paste Actions

Download Raw
Embed
Post to Twitter
Remove Paste

Paste Details

Raw format, 10 years 3 days old.

Advertising

Stuff
Tuesday, January 8th, 2008 at 5:38:40am UTC 

  1. sudo dmesg
  2. [    0.000000] Linux version 2.6.22-14-generic ([email protected]) (gcc version 4
  3. .1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Dec 18 08:02:57
  4. UTC 2007 (Ubuntu 2.6.22-14.47-generic)
  5. [    0.000000] BIOS-provided physical RAM map:
  6. [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
  7. [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
  8. [    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
  9. [    0.000000]  BIOS-e820: 0000000000100000 - 000000001beb0000 (usable)
  10. [    0.000000]  BIOS-e820: 000000001beb0000 - 000000001beb8000 (ACPI data)
  11. [    0.000000]  BIOS-e820: 000000001beb8000 - 000000001bf00000 (ACPI NVS)
  12. [    0.000000]  BIOS-e820: 000000001bf00000 - 000000001c000000 (reserved)
  13. [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
  14. [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
  15. [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  16. [    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
  17. [    0.000000] 0MB HIGHMEM available.
  18. [    0.000000] 446MB LOWMEM available.
  19. [    0.000000] found SMP MP-table at 000f7890
  20. [    0.000000] Entering add_active_range(0, 0, 114352) 0 entries of 256 used
  21. [    0.000000] Zone PFN ranges:
  22. [    0.000000]   DMA             0 ->     4096
  23. [    0.000000]   Normal       4096 ->   114352
  24. [    0.000000]   HighMem    114352 ->   114352
  25. [    0.000000] early_node_map[1] active PFN ranges
  26. [    0.000000]     0:        0 ->   114352
  27. [    0.000000] On node 0 totalpages: 114352
  28. [    0.000000]   DMA zone: 32 pages used for memmap
  29. [    0.000000]   DMA zone: 0 pages reserved
  30. [    0.000000]   DMA zone: 4064 pages, LIFO batch:0
  31. [    0.000000]   Normal zone: 861 pages used for memmap
  32. [    0.000000]   Normal zone: 109395 pages, LIFO batch:31
  33. [    0.000000]   HighMem zone: 0 pages used for memmap
  34. [    0.000000] DMI present.
  35. [    0.000000] ACPI: RSDP signature @ 0xC00F7840 checksum 0
  36. [    0.000000] ACPI: RSDP 000F7840, 0014 (r0 TOSINV)
  37. [    0.000000] ACPI: RSDT 1BEB428E, 0038 (r1 TOSINV   RSDT    6040000  LTP
  38.   0)
  39. [    0.000000] ACPI: FACP 1BEB7EF6, 0074 (r1 TOSINV Goldfish  6040000 ATI     F4
  40. 240)
  41. [    0.000000] ACPI: DSDT 1BEB46E2, 3814 (r1 TOSINV    SB400  6040000 MSFT  1000
  42. 00E)
  43. [    0.000000] ACPI: FACS 1BEB8FC0, 0040
  44. [    0.000000] ACPI: APIC 1BEB7F6A, 005A (r1 TOSINV      APIC    6040000  LTP
  45.      0)
  46. [    0.000000] ACPI: MCFG 1BEB7FC4, 003C (r1 TOSINV   MCFG    6040000  LTP
  47.   0)
  48. [    0.000000] ACPI: SSDT 1BEB44C1, 0221 (r1 TOSINV  Cpu0Cst     3001 INTL 20030
  49. 224)
  50. [    0.000000] ACPI: SSDT 1BEB42C6, 01FB (r1 TOSINV    CpuPm     3000 INTL 20030
  51. 224)
  52. [    0.000000] ATI board detected. Disabling timer routing over 8254.
  53. [    0.000000] ACPI: PM-Timer IO Port: 0x8008
  54. [    0.000000] ACPI: Local APIC address 0xfee00000
  55. [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  56. [    0.000000] Processor #0 6:13 APIC version 20
  57. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  58. [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
  59. [    0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
  60. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
  61. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
  62. [    0.000000] ACPI: IRQ0 used by override.
  63. [    0.000000] ACPI: IRQ2 used by override.
  64. [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
  65. [    0.000000] Using ACPI (MADT) for SMP configuration information
  66. [    0.000000] Allocating PCI resources starting at 20000000 (gap: 1c000000:c400
  67. 0000)
  68. [    0.000000] Built 1 zonelists.  Total pages: 113459
  69. [    0.000000] Kernel command line: root=UUID=992fe76e-0cb1-4637-a075-871866332c
  70. 04 ro quiet splash
  71. [    0.000000] mapped APIC to ffffd000 (fee00000)
  72. [    0.000000] mapped IOAPIC to ffffc000 (fec00000)
  73. [    0.000000] Enabling fast FPU save and restore... done.
  74. [    0.000000] Enabling unmasked SIMD FPU exception support... done.
  75. [    0.000000] Initializing CPU#0
  76. [    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
  77. [    0.000000] Detected 1596.216 MHz processor.
  78. [   38.998953] Console: colour VGA+ 80x25
  79. [   38.999518] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  80. [   38.999967] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  81. [   39.017379] Memory: 441612k/457408k available (2015k kernel code, 15224k rese
  82. rved, 916k data, 364k init, 0k highmem)
  83. [   39.017390] virtual kernel memory layout:
  84. [   39.017391]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
  85. [   39.017393]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
  86. [   39.017394]     vmalloc : 0xdc800000 - 0xff7fe000   ( 559 MB)
  87. [   39.017396]     lowmem  : 0xc0000000 - 0xdbeb0000   ( 446 MB)
  88. [   39.017397]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
  89. [   39.017398]       .data : 0xc02f7de6 - 0xc03dce84   ( 916 kB)
  90. [   39.017400]       .text : 0xc0100000 - 0xc02f7de6   (2015 kB)
  91. [   39.017404] Checking if this processor honours the WP bit even in supervisor
  92. mode... Ok.
  93. [   39.017448] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, N
  94. odes=1
  95. [   39.097407] Calibrating delay using timer specific routine.. 3195.76 BogoMIPS
  96.  (lpj=6391537)
  97. [   39.097441] Security Framework v1.0.0 initialized
  98. [   39.097451] SELinux:  Disabled at boot.
  99. [   39.097467] Mount-cache hash table entries: 512
  100. [   39.097616] CPU: After generic identify, caps: afe9fbff 00000000 00000000 000
  101. 00000 00000000 00000000 00000000
  102. [   39.097629] CPU: L1 I cache: 32K, L1 D cache: 32K
  103. [   39.097632] CPU: L2 cache: 1024K
  104. [   39.097636] CPU: After all inits, caps: afe9fbff 00000000 00000000 00002040 0
  105. 0000000 00000000 00000000
  106. [   39.097647] Compat vDSO mapped to ffffe000.
  107. [   39.097660] Checking 'hlt' instruction... OK.
  108. [   39.113506] SMP alternatives: switching to UP code
  109. [   39.113728] Freeing SMP alternatives: 11k freed
  110. [   39.114026] Early unpacking initramfs... done
  111. [   39.492737] ACPI: Core revision 20070126
  112. [   39.492816] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not
  113. found.
  114. [   39.515096] CPU0: Intel(R) Celeron(R) M processor         1.60GHz stepping 08
  115. [   39.515125] Total of 1 processors activated (3195.76 BogoMIPS).
  116. [   39.515317] ENABLING IO-APIC IRQs
  117. [   39.515526] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
  118. [   39.555228] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
  119. [   39.555279] ...trying to set up timer (IRQ0) through the 8259A ...  failed.
  120. [   39.555281] ...trying to set up timer as Virtual Wire IRQ... works.
  121. [   39.700936] Brought up 1 CPUs
  122. [   39.701064] Booting paravirtualized kernel on bare hardware
  123. [   39.701160] Time: 23:26:18  Date: 00/07/108
  124. [   39.701188] NET: Registered protocol family 16
  125. [   39.701291] EISA bus registered
  126. [   39.701309] ACPI: bus type pci registered
  127. [   39.701509] PCI: PCI BIOS revision 2.10 entry at 0xfd84c, last bus=4
  128. [   39.701511] PCI: Using configuration type 1
  129. [   39.701514] Setting up standard PCI resources
  130. [   39.706795] ACPI: EC: Look up EC in DSDT
  131. [   39.707404] ACPI: EC: GPE=0x07, ports=0x66, 0x62
  132. [   39.714094] ACPI: Interpreter enabled
  133. [   39.714098] ACPI: (supports S0 S3 S4 S5)
  134. [   39.714115] ACPI: Using IOAPIC for interrupt routing
  135. [   39.747683] ACPI: EC: GPE=0x07, ports=0x66, 0x62
  136. [   39.747724] ACPI: PCI Root Bridge [PCI0] (0000:00)
  137. [   39.747734] PCI: Probing PCI hardware (bus 00)
  138. [   39.749196] PCI: Transparent bridge - 0000:00:14.4
  139. [   39.749310] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  140. [   39.749548] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
  141. [   39.749731] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
  142. [   39.751267] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
  143. [   39.751366] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
  144. [   39.751461] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
  145. [   39.751556] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
  146. [   39.751651] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
  147. [   39.751746] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
  148. [   39.751840] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
  149. [   39.751935] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
  150. [   39.752053] ACPI: Power Resource [PFA1] (off)
  151. [   39.752060] Linux Plug and Play Support v0.97 (c) Adam Belay
  152. [   39.752071] pnp: PnP ACPI init
  153. [   39.752079] ACPI: bus type pnp registered
  154. [   39.766210] pnp: PnP ACPI: found 10 devices
  155. [   39.766213] ACPI: ACPI bus type pnp unregistered
  156. [   39.766218] PnPBIOS: Disabled by ACPI PNP
  157. [   39.766270] PCI: Using ACPI for IRQ routing
  158. [   39.766273] PCI: If a device doesn't work, try "pci=routeirq".  If it helps,
  159. post a report
  160. [   39.779190] NET: Registered protocol family 8
  161. [   39.779192] NET: Registered protocol family 20
  162. [   39.779257] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserv
  163. ed
  164. [   39.779266] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
  165. [   39.779269] pnp: 00:08: ioport range 0x220-0x22f has been reserved
  166. [   39.779272] pnp: 00:08: ioport range 0x400-0x401 has been reserved
  167. [   39.779275] pnp: 00:08: ioport range 0x40b-0x40b has been reserved
  168. [   39.779280] pnp: 00:09: iomem range 0xe0000-0xfffff could not be reserved
  169. [   39.779284] pnp: 00:09: iomem range 0xfff80000-0xffffffff could not be reserv
  170. ed
  171. [   39.779287] pnp: 00:09: iomem range 0x0-0xfff could not be reserved
  172. [   39.780821] Time: tsc clocksource has been installed.
  173. [   39.809591] PCI: Bridge: 0000:00:01.0
  174. [   39.809594]   IO window: 9000-9fff
  175. [   39.809598]   MEM window: c0100000-c01fffff
  176. [   39.809602]   PREFETCH window: d0000000-dfffffff
  177. [   39.809609] PCI: Bus 3, cardbus bridge: 0000:02:06.0
  178. [   39.809611]   IO window: 0000a400-0000a4ff
  179. [   39.809618]   IO window: 0000a800-0000a8ff
  180. [   39.809625]   PREFETCH window: 20000000-23ffffff
  181. [   39.809631]   MEM window: 24000000-27ffffff
  182. [   39.809638] PCI: Bridge: 0000:00:14.4
  183. [   39.809642]   IO window: a000-afff
  184. [   39.809650]   MEM window: c0200000-c02fffff
  185. [   39.809655]   PREFETCH window: 20000000-23ffffff
  186. [   39.809705] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 19 (level, low) -> IRQ
  187.  16
  188. [   39.809726] NET: Registered protocol family 2
  189. [   39.848821] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  190. [   39.848873] TCP established hash table entries: 16384 (order: 5, 196608 bytes
  191. )
  192. [   39.849126] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
  193. [   39.849345] TCP: Hash tables configured (established 16384 bind 16384)
  194. [   39.849348] TCP reno registered
  195. [   39.860903] checking if image is initramfs... it is
  196. [   40.312358] Switched to high resolution mode on CPU 0
  197. [   40.613223] Freeing initrd memory: 7360k freed
  198. [   40.613804] audit: initializing netlink socket (disabled)
  199. [   40.613827] audit(1199748378.104:1): initialized
  200. [   40.615919] VFS: Disk quotas dquot_6.5.1
  201. [   40.615982] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  202. [   40.616127] io scheduler noop registered
  203. [   40.616131] io scheduler anticipatory registered
  204. [   40.616133] io scheduler deadline registered
  205. [   40.616151] io scheduler cfq registered (default)
  206. [   41.291538] Boot video device is 0000:01:05.0
  207. [   41.291744] isapnp: Scanning for PnP cards...
  208. [   41.646341] isapnp: No Plug & Play device found
  209. [   41.684964] Real Time Clock Driver v1.12ac
  210. [   41.685116] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
  211. enabled
  212. [   41.686154] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ
  213.  17
  214. [   41.686168] ACPI: PCI interrupt for device 0000:00:14.6 disabled
  215. [   41.686809] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 bloc
  216. ksize
  217. [   41.687093] input: Macintosh mouse button emulation as /class/input/input0
  218. [   41.687238] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq
  219.  1,12
  220. [   41.689758] serio: i8042 KBD port at 0x60,0x64 irq 1
  221. [   41.689765] serio: i8042 AUX port at 0x60,0x64 irq 12
  222. [   41.689950] mice: PS/2 mouse device common for all mice
  223. [   41.690079] EISA: Probing bus 0 at eisa.0
  224. [   41.690091] Cannot allocate resource for EISA slot 1
  225. [   41.690122] Cannot allocate resource for EISA slot 8
  226. [   41.690125] EISA: Detected 0 cards.
  227. [   41.690259] TCP cubic registered
  228. [   41.690282] NET: Registered protocol family 1
  229. [   41.690316] Using IPI No-Shortcut mode
  230. [   41.690534]   Magic number: 8:309:453
  231. [   41.691291] Freeing unused kernel memory: 364k freed
  232. [   41.731215] input: AT Translated Set 2 keyboard as /class/input/input1
  233. [   42.896625] fuse init (API version 7.8)
  234. [   42.901703] Capability LSM initialized
  235. [   42.905078] ACPI: Transitioning device [FAN1] to D3
  236. [   42.905081] ACPI: Transitioning device [FAN1] to D3
  237. [   42.905085] ACPI: Fan [FAN1] (off)
  238. [   42.909674] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
  239. [   42.909680] ACPI: Processor [CPU0] (supports 8 throttling states)
  240. [   42.909693] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Dev
  241. ice is not present [20070126]
  242. [    3.784000] Marking TSC unstable due to: possible TSC halt in C2.
  243. [    3.796000] Time: acpi_pm clocksource has been installed.
  244. [    3.944000] ACPI: Thermal Zone [TZCR] (60 C)
  245. [    4.132000] Clocksource tsc unstable (delta = -119131616 ns)
  246. [    4.424000] usbcore: registered new interface driver usbfs
  247. [    4.424000] usbcore: registered new interface driver hub
  248. [    4.424000] usbcore: registered new device driver usb
  249. [    4.424000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Dr
  250. iver
  251. [    4.424000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ
  252.  16
  253. [    4.424000] ohci_hcd 0000:00:13.0: OHCI Host Controller
  254. [    4.424000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus numbe
  255. r 1
  256. [    4.424000] ohci_hcd 0000:00:13.0: irq 16, io mem 0xc0000000
  257. [    4.492000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
  258. [    4.492000] ide: Assuming 33MHz system bus speed for PIO modes; override with
  259.  idebus=xx
  260. [    4.528000] usb usb1: configuration #1 chosen from 1 choice
  261. [    4.528000] hub 1-0:1.0: USB hub found
  262. [    4.528000] hub 1-0:1.0: 4 ports detected
  263. [    4.604000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
  264. [    4.632000] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ
  265.  16
  266. [    4.632000] ohci_hcd 0000:00:13.1: OHCI Host Controller
  267. [    4.632000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus numbe
  268. r 2
  269. [    4.632000] ohci_hcd 0000:00:13.1: irq 16, io mem 0xc0001000
  270. [    4.688000] usb usb2: configuration #1 chosen from 1 choice
  271. [    4.688000] hub 2-0:1.0: USB hub found
  272. [    4.688000] hub 2-0:1.0: 4 ports detected
  273. [    4.792000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ
  274.  16
  275. [    4.792000] ehci_hcd 0000:00:13.2: EHCI Host Controller
  276. [    4.792000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus numbe
  277. r 3
  278. [    4.792000] ehci_hcd 0000:00:13.2: irq 16, io mem 0xc0002000
  279. [    4.792000] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec
  280. 2004
  281. [    4.792000] usb usb3: configuration #1 chosen from 1 choice
  282. [    4.792000] hub 3-0:1.0: USB hub found
  283. [    4.792000] hub 3-0:1.0: 8 ports detected
  284. [    4.896000] ATIIXP: IDE controller at PCI slot 0000:00:14.1
  285. [    4.896000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ
  286.  18
  287. [    4.896000] ATIIXP: chipset revision 0
  288. [    4.896000] ATIIXP: not 100% native mode: will probe irqs later
  289. [    4.896000]     ide0: BM-DMA at 0x8430-0x8437, BIOS settings: hda:DMA, hdb:pi
  290. o
  291. [    4.896000]     ide1: BM-DMA at 0x8438-0x843f, BIOS settings: hdc:DMA, hdd:pi
  292. o
  293. [    4.896000] Probing IDE interface ide0...
  294. [    5.184000] hda: HTS541080G9AT00, ATA DISK drive
  295. [    5.856000] hda: selected mode 0x45
  296. [    5.856000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
  297. [    6.212000] Probing IDE interface ide1...
  298. [    6.948000] hdc: MATSHITADVD-RAM UJ-841S, ATAPI CD/DVD-ROM drive
  299. [    7.284000] hdc: selected mode 0x42
  300. [    7.284000] ide1 at 0x170-0x177,0x376 on irq 15
  301. [    7.296000] SCSI subsystem initialized
  302. [    7.300000] libata version 2.21 loaded.
  303. [    7.304000] 8139cp 0000:02:07.0: This (id 10ec:8139 rev 10) is not an 8139C+
  304. compatible chip
  305. [    7.304000] 8139cp 0000:02:07.0: Try the "8139too" driver instead.
  306. [    7.304000] 8139too Fast Ethernet driver 0.9.28
  307. [    7.308000] ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 18 (level, low) -> IRQ
  308.  19
  309. [    7.308000] eth0: RealTek RTL8139 at 0xdc83c000, 00:a0:d1:27:ab:71, IRQ 19
  310. [    7.308000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
  311. [    7.308000] ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 19 (level, low) -> IRQ
  312.  16
  313. [    7.360000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[c0215800
  314. -c0215fff]  Max Packet=[2048]  IR/IT contexts=[4/8]
  315. [    7.368000] hda: max request size: 512KiB
  316. [    7.376000] hda: 156301488 sectors (80026 MB) w/7539KiB Cache, CHS=16383/255/
  317. 63, UDMA(100)
  318. [    7.376000] hda: cache flushes supported
  319. [    7.376000]  hda: hda1 hda2 hda3 hda4
  320. [    7.448000] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDM
  321. A(33)
  322. [    7.448000] Uniform CD-ROM driver Revision: 3.20
  323. [    7.776000] Attempting manual resume
  324. [    7.776000] swsusp: Resume From Partition 3:3
  325. [    7.776000] PM: Checking swsusp image.
  326. [    7.800000] PM: Resume from disk failed.
  327. [    7.860000] kjournald starting.  Commit interval 5 seconds
  328. [    7.860000] EXT3-fs: mounted filesystem with ordered data mode.
  329. [    8.632000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[a00d080071ab27d1]
  330. [   16.596000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
  331. [   17.584000] NET: Registered protocol family 10
  332. [   17.584000] lo: Disabled Privacy Extensions
  333. [   18.280000] Linux agpgart interface v0.102 (c) Dave Jones
  334. [   18.340000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  335. [   18.356000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  336. [   18.680000] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
  337. [   19.212000] Yenta: CardBus bridge found at 0000:02:06.0 [1179:ff10]
  338. [   19.212000] Yenta: Enabling burst memory read transactions
  339. [   19.212000] Yenta: Using CSCINT to route CSC interrupts to PCI
  340. [   19.212000] Yenta: Routing CardBus interrupts to PCI
  341. [   19.212000] Yenta TI: socket 0000:02:06.0, mfunc 0x01111122, devctl 0x64
  342. [   19.428000] input: PC Speaker as /class/input/input2
  343. [   19.444000] Yenta: ISA IRQ mask 0x0ef8, PCI irq 16
  344. [   19.444000] Socket status: 30000006
  345. [   19.444000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
  346. [   19.444000] cs: IO port probe 0xa000-0xafff: clean.
  347. [   19.444000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
  348. [   19.444000] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff
  349. [   19.640000] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ
  350.  17
  351. [   19.820000] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ
  352.  17
  353. [   19.920000] cs: IO port probe 0x100-0x3af: clean.
  354. [   19.920000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
  355. [   19.924000] cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87f
  356. [   19.924000] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17
  357. 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
  358. [   19.924000] cs: IO port probe 0xa00-0xaff: clean.
  359. [   19.988000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa047
  360. 13/0x0
  361. [   19.988000] synaptics: Toshiba Satellite M45 detected, limiting rate to 40pps
  362. .
  363. [   20.020000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
  364. [   21.432000] lp: driver loaded but no devices found
  365. [   21.512000] Adding 1405676k swap on /dev/hda3.  Priority:-1 extents:1 across:
  366. 1405676k
  367. [   21.820000] EXT3 FS on hda2, internal journal
  368. [   21.984000] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-d
  369. [email protected]
  370. [   23.820000] ACPI: Battery Slot [BAT0] (battery present)
  371. [   24.028000] No dock devices found.
  372. [   24.132000] input: Power Button (FF) as /class/input/input4
  373. [   24.132000] ACPI: Power Button (FF) [PWRF]
  374. [   24.156000] input: Power Button (CM) as /class/input/input5
  375. [   24.156000] ACPI: Power Button (CM) [PWRB]
  376. [   24.168000] input: Lid Switch as /class/input/input6
  377. [   24.168000] ACPI: Lid Switch [LID]
  378. [   24.292000] ACPI: AC Adapter [ADP0] (on-line)
  379. [   25.664000] Capability LSM initialized
  380. [   25.992000] ppdev: user-space parallel port driver
  381. [   26.280000] apm: BIOS not found.
  382. [   27.700000] eth0: no IPv6 routers present
  383. [   28.356000] Bluetooth: Core ver 2.11
  384. [   28.360000] NET: Registered protocol family 31
  385. [   28.360000] Bluetooth: HCI device and connection manager initialized
  386. [   28.360000] Bluetooth: HCI socket layer initialized
  387. [   28.372000] Bluetooth: L2CAP ver 2.8
  388. [   28.372000] Bluetooth: L2CAP socket layer initialized
  389. [   28.452000] Bluetooth: RFCOMM socket layer initialized
  390. [   28.452000] Bluetooth: RFCOMM TTY layer initialized
  391. [   28.452000] Bluetooth: RFCOMM ver 1.8
  392. [ 2176.516000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
  393. [ 2176.516000] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=8823179
  394. 2, high=5, low=4345712, sector=88231739
  395. [ 2176.516000] ide: failed opcode was: unknown
  396. [ 2176.516000] end_request: I/O error, dev hda, sector 88231739
  397. [ 2180.704000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
  398. [ 2180.704000] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=8823179
  399. 2, high=5, low=4345712, sector=88231747
  400. [ 2180.704000] ide: failed opcode was: unknown
  401. [ 2180.704000] end_request: I/O error, dev hda, sector 88231747
  402. [ 2185.536000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
  403. [ 2185.536000] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=8823179
  404. 2, high=5, low=4345712, sector=88231755
  405. [ 2185.536000] ide: failed opcode was: unknown
  406. [ 2185.536000] end_request: I/O error, dev hda, sector 88231755
  407. [ 2189.700000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
  408. [ 2189.700000] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=8823179
  409. 2, high=5, low=4345712, sector=88231763
  410. [ 2189.700000] ide: failed opcode was: unknown
  411. [ 2189.700000] end_request: I/O error, dev hda, sector 88231763
  412. [ 2193.880000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
  413. [ 2193.880000] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=8823179
  414. 2, high=5, low=4345712, sector=88231771
  415. [ 2193.880000] ide: failed opcode was: unknown
  416. [ 2193.880000] end_request: I/O error, dev hda, sector 88231771
  417. [ 2198.056000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
  418. [ 2198.056000] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=8823179
  419. 2, high=5, low=4345712, sector=88231779
  420. [ 2198.056000] ide: failed opcode was: unknown
  421. [ 2198.056000] end_request: I/O error, dev hda, sector 88231779
  422. [ 2202.896000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
  423. [ 2202.896000] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=8823179
  424. 2, high=5, low=4345712, sector=88231787
  425. [ 2202.896000] ide: failed opcode was: unknown
  426. [ 2202.896000] end_request: I/O error, dev hda, sector 88231787
  427. [ 2207.932000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
  428. [ 2207.932000] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=8823050
  429. 0, high=5, low=4344420, sector=88230475
  430. [ 2207.932000] ide: failed opcode was: unknown
  431. [ 2207.932000] end_request: I/O error, dev hda, sector 88230475
  432. [ 2212.076000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
  433. [ 2212.076000] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=8823050
  434. 0, high=5, low=4344420, sector=88230483
  435. [ 2212.076000] ide: failed opcode was: unknown
  436. [ 2212.076000] end_request: I/O error, dev hda, sector 88230483
  437. [ 2216.884000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
  438. [ 2216.884000] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=8823050
  439. 0, high=5, low=4344420, sector=88230491
  440. [ 2216.884000] ide: failed opcode was: unknown
  441. [ 2216.884000] end_request: I/O error, dev hda, sector 88230491
  442. [ 2221.744000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
  443. [ 2221.744000] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=8823050
  444. 0, high=5, low=4344420, sector=88230499
  445. [ 2221.744000] ide: failed opcode was: unknown
  446. [ 2221.744000] end_request: I/O error, dev hda, sector 88230499
  447. [ 2226.804000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
  448. [ 2226.804000] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=8821629
  449. 7, high=5, low=4330217, sector=88216267
  450. [ 2226.804000] ide: failed opcode was: unknown
  451. [ 2226.804000] end_request: I/O error, dev hda, sector 88216267
  452. [ 2230.960000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
  453. [ 2230.960000] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=8821629
  454. 7, high=5, low=4330217, sector=88216275
  455. [ 2230.960000] ide: failed opcode was: unknown
  456. [ 2230.960000] end_request: I/O error, dev hda, sector 88216275
  457. [ 2235.124000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
  458. [ 2235.124000] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=8821629
  459. 7, high=5, low=4330217, sector=88216283
  460. [ 2235.124000] ide: failed opcode was: unknown
  461. [ 2235.124000] end_request: I/O error, dev hda, sector 88216283
  462. [ 2239.292000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
  463. [ 2239.292000] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=8821629
  464. 7, high=5, low=4330217, sector=88216291
  465. [ 2239.292000] ide: failed opcode was: unknown
  466. [ 2239.292000] end_request: I/O error, dev hda, sector 88216291
  467. [ 2244.056000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
  468. [ 2244.056000] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=8822745
  469. 4, high=5, low=4341374, sector=88227419
  470. [ 2244.056000] ide: failed opcode was: unknown
  471. [ 2244.056000] end_request: I/O error, dev hda, sector 88227419
  472. [ 2248.552000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
  473. [ 2248.552000] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=8822745
  474. 4, high=5, low=4341374, sector=88227427
  475. [ 2248.552000] ide: failed opcode was: unknown
  476. [ 2248.552000] end_request: I/O error, dev hda, sector 88227427
  477. [ 2252.400000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
  478. [ 2252.400000] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=8822745
  479. 4, high=5, low=4341374, sector=88227435
  480. [ 2252.400000] ide: failed opcode was: unknown
  481. [ 2252.400000] end_request: I/O error, dev hda, sector 88227435
  482. [ 2256.256000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
  483. [ 2256.256000] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=8822745
  484. 4, high=5, low=4341374, sector=88227443
  485. [ 2256.256000] ide: failed opcode was: unknown
  486. [ 2256.256000] end_request: I/O error, dev hda, sector 88227443
  487. [ 2260.092000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
  488. [ 2260.092000] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=8822745                    4, high=5, low=4341374, sector=88227451
  489. [ 2260.092000] ide: failed opcode was: unknown
  490. [ 2260.092000] end_request: I/O error, dev hda, sector 88227451
  491. [ 2266.180000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
  492. [ 2266.180000] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=8823179                    2, high=5, low=4345712, sector=88231787
  493. [ 2266.180000] ide: failed opcode was: unknown
  494. [ 2266.180000] end_request: I/O error, dev hda, sector 88231787
  495. [ 2838.176000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
  496. [ 2838.176000] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=8823179                    2, high=5, low=4345712, sector=88231787
  497. [ 2838.176000] ide: failed opcode was: unknown
  498. [ 2838.176000] end_request: I/O error, dev hda, sector 88231787
  499. [ 3634.700000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
  500. [ 3634.700000] hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=8823179                    2, high=5, low=4345712, sector=88231787

advertising

Update the Post

Either update this post and resubmit it with changes, or make a new post.

You may also comment on this post.

update paste below
details of the post (optional)

Note: Only the paste content is required, though the following information can be useful to others.

Save name / title?

(space separated, optional)



Please note that information posted here will not expire by default. If you do not want it to expire, please set the expiry time above. If it is set to expire, web search engines will not be allowed to index it prior to it expiring. Items that are not marked to expire will be indexable by search engines. Be careful with your passwords. All illegal activities will be reported and any information will be handed over to the authorities, so be good.

comments powered by Disqus
worth-right
worth-right
worth-right