Part of Slepp's Projects — Pastebin — TURL — Imagebin — Filebin
Feedback -- English French German Japanese
Create Upload Newest Tools Donate

Paste Actions

Download Raw
Embed
Post to Twitter
Remove Paste

Paste Details

Raw format, 10 years 5 months old.

Advertising

Someone
Saturday, July 21st, 2007 at 8:01:27pm UTC 

  1. [    0.000000] Linux version 2.6.20-16-lowlatency ([email protected]) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP PREEMPT Thu Jun 7 20:23:03 UTC 2007 (Ubuntu Unofficial)
  2. [    0.000000] BIOS-provided physical RAM map:
  3. [    0.000000] sanitize start
  4. [    0.000000] sanitize end
  5. [    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
  6. [    0.000000] copy_e820_map() type is E820_RAM
  7. [    0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
  8. [    0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2
  9. [    0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fed0000 end: 000000003ffd0000 type: 1
  10. [    0.000000] copy_e820_map() type is E820_RAM
  11. [    0.000000] copy_e820_map() start: 000000003ffd0000 size: 000000000000e000 end: 000000003ffde000 type: 3
  12. [    0.000000] copy_e820_map() start: 000000003ffde000 size: 0000000000022000 end: 0000000040000000 type: 4
  13. [    0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
  14. [    0.000000] copy_e820_map() start: 00000000ff780000 size: 0000000000880000 end: 0000000100000000 type: 2
  15. [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  16. [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  17. [    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
  18. [    0.000000]  BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
  19. [    0.000000]  BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data)
  20. [    0.000000]  BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS)
  21. [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
  22. [    0.000000]  BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
  23. [    0.000000] 127MB HIGHMEM available.
  24. [    0.000000] 896MB LOWMEM available.
  25. [    0.000000] found SMP MP-table at 000ff780
  26. [    0.000000] Entering add_active_range(0, 0, 262096) 0 entries of 256 used
  27. [    0.000000] Zone PFN ranges:
  28. [    0.000000]   DMA             0 ->     4096
  29. [    0.000000]   Normal       4096 ->   229376
  30. [    0.000000]   HighMem    229376 ->   262096
  31. [    0.000000] early_node_map[1] active PFN ranges
  32. [    0.000000]     0:        0 ->   262096
  33. [    0.000000] On node 0 totalpages: 262096
  34. [    0.000000]   DMA zone: 32 pages used for memmap
  35. [    0.000000]   DMA zone: 0 pages reserved
  36. [    0.000000]   DMA zone: 4064 pages, LIFO batch:0
  37. [    0.000000]   Normal zone: 1760 pages used for memmap
  38. [    0.000000]   Normal zone: 223520 pages, LIFO batch:31
  39. [    0.000000]   HighMem zone: 255 pages used for memmap
  40. [    0.000000]   HighMem zone: 32465 pages, LIFO batch:7
  41. [    0.000000] DMI 2.3 present.
  42. [    0.000000] ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f9350
  43. [    0.000000] ACPI: RSDT (v001 A M I  OEMRSDT  0x07000526 MSFT 0x00000097) @ 0x3ffd0000
  44. [    0.000000] ACPI: FADT (v002 A M I  OEMFACP  0x07000526 MSFT 0x00000097) @ 0x3ffd0200
  45. [    0.000000] ACPI: MADT (v001 A M I  OEMAPIC  0x07000526 MSFT 0x00000097) @ 0x3ffd0390
  46. [    0.000000] ACPI: OEMB (v001 A M I  AMI_OEM  0x07000526 MSFT 0x00000097) @ 0x3ffde040
  47. [    0.000000] ACPI: DSDT (v001  1XXXX 1XXXX005 0x00000005 INTL 0x02002026) @ 0x00000000
  48. [    0.000000] ACPI: PM-Timer IO Port: 0x808
  49. [    0.000000] ACPI: Local APIC address 0xfee00000
  50. [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  51. [    0.000000] Processor #0 15:12 APIC version 16
  52. [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
  53. [    0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
  54. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  55. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
  56. [    0.000000] ACPI: IRQ0 used by override.
  57. [    0.000000] ACPI: IRQ2 used by override.
  58. [    0.000000] ACPI: IRQ9 used by override.
  59. [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
  60. [    0.000000] Using ACPI (MADT) for SMP configuration information
  61. [    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
  62. [    0.000000] Detected 1600.204 MHz processor.
  63. [   71.305210] Built 1 zonelists.  Total pages: 260049
  64. [   71.305214] Kernel command line: root=UUID=caa6bbb2-6ea3-4be2-a8ff-d191be404a49 ro quiet splash
  65. [   71.305372] mapped APIC to ffffd000 (fee00000)
  66. [   71.305375] mapped IOAPIC to ffffc000 (fec00000)
  67. [   71.305379] Enabling fast FPU save and restore... done.
  68. [   71.305382] Enabling unmasked SIMD FPU exception support... done.
  69. [   71.305391] Initializing CPU#0
  70. [   71.305476] PID hash table entries: 4096 (order: 12, 16384 bytes)
  71. [   71.307805] Console: colour VGA+ 80x25
  72. [   71.308348] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  73. [   71.309342] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  74. [   71.336204] Memory: 1028156k/1048384k available (2019k kernel code, 19536k reserved, 902k data, 328k init, 130880k highmem)
  75. [   71.336216] virtual kernel memory layout:
  76. [   71.336217]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
  77. [   71.336219]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
  78. [   71.336220]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
  79. [   71.336221]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
  80. [   71.336223]       .init : 0xc03e1000 - 0xc0433000   ( 328 kB)
  81. [   71.336224]       .data : 0xc02f8c85 - 0xc03da6d4   ( 902 kB)
  82. [   71.336226]       .text : 0xc0100000 - 0xc02f8c85   (2019 kB)
  83. [   71.336229] Checking if this processor honours the WP bit even in supervisor mode... Ok.
  84. [   71.395336] Calibrating delay using timer specific routine.. 3203.08 BogoMIPS (lpj=1601543)
  85. [   71.395391] Security Framework v1.0.0 initialized
  86. [   71.395400] SELinux:  Disabled at boot.
  87. [   71.395420] Mount-cache hash table entries: 512
  88. [   71.395582] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000000 00000000 00000001
  89. [   71.395592] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  90. [   71.395595] CPU: L2 Cache: 256K (64 bytes/line)
  91. [   71.395598] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000000 00000000 00000001
  92. [   71.395611] Compat vDSO mapped to ffffe000.
  93. [   71.395616] Remapping vsyscall page to ffffe000
  94. [   71.395628] Checking 'hlt' instruction... OK.
  95. [   71.399482] SMP alternatives: switching to UP code
  96. [   71.399674] Freeing SMP alternatives: 9k freed
  97. [   71.399868] Early unpacking initramfs... done
  98. [   71.756516] ACPI: Core revision 20060707
  99. [   71.757065] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
  100. [   71.759097] CPU0: AMD Sempron(tm) Processor 2800+ stepping 00
  101. [   71.759120] Total of 1 processors activated (3203.08 BogoMIPS).
  102. [   71.759629] ENABLING IO-APIC IRQs
  103. [   71.759963] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
  104. [   71.871589] Brought up 1 CPUs
  105. [   71.871882] Booting paravirtualized kernel on bare hardware
  106. [   71.871997] Time: 17:37:18  Date: 06/20/107
  107. [   71.872032] NET: Registered protocol family 16
  108. [   71.872127] EISA bus registered
  109. [   71.872131] ACPI: bus type pci registered
  110. [   71.872971] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
  111. [   71.872973] PCI: Using configuration type 1
  112. [   71.872975] Setting up standard PCI resources
  113. [   71.886108] ACPI: Interpreter enabled
  114. [   71.886112] ACPI: Using IOAPIC for interrupt routing
  115. [   71.886850] ACPI: PCI Root Bridge [PCI0] (0000:00)
  116. [   71.886855] PCI: Probing PCI hardware (bus 00)
  117. [   71.888103] Boot video device is 0000:01:00.0
  118. [   71.888158] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  119. [   71.914780] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
  120. [   71.915036] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  121. [   71.915282] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  122. [   71.915538] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  123. [   71.915849] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  124. [   71.916096] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  125. [   71.916344] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  126. [   71.916615] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  127. [   71.916702] Linux Plug and Play Support v0.97 (c) Adam Belay
  128. [   71.916715] pnp: PnP ACPI init
  129. [   71.922186] pnp: PnP ACPI: found 15 devices
  130. [   71.922190] PnPBIOS: Disabled by ACPI PNP
  131. [   71.922256] PCI: Using ACPI for IRQ routing
  132. [   71.922260] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
  133. [   71.927200] NET: Registered protocol family 8
  134. [   71.927202] NET: Registered protocol family 20
  135. [   71.927923] pnp: 00:0b: ioport range 0x680-0x6ff has been reserved
  136. [   71.927926] pnp: 00:0b: ioport range 0x295-0x296 has been reserved
  137. [   71.928209] PCI: Bridge: 0000:00:01.0
  138. [   71.928213]   IO window: b000-bfff
  139. [   71.928219]   MEM window: ff500000-ff5fffff
  140. [   71.928223]   PREFETCH window: deb00000-eeafffff
  141. [   71.928244] PCI: Setting latency timer of device 0000:00:01.0 to 64
  142. [   71.928276] NET: Registered protocol family 2
  143. [   71.937499] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  144. [   71.937687] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
  145. [   71.939656] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  146. [   71.940591] TCP: Hash tables configured (established 131072 bind 65536)
  147. [   71.940595] TCP reno registered
  148. [   71.943549] checking if image is initramfs... it is
  149. [   72.642651] Freeing initrd memory: 6800k freed
  150. [   72.643139] audit: initializing netlink socket (disabled)
  151. [   72.643153] audit(1184953038.533:1): initialized
  152. [   72.643242] highmem bounce pool size: 64 pages
  153. [   72.643314] VFS: Disk quotas dquot_6.5.1
  154. [   72.643338] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  155. [   72.643392] io scheduler noop registered
  156. [   72.643395] io scheduler anticipatory registered
  157. [   72.643398] io scheduler deadline registered
  158. [   72.643408] io scheduler cfq registered (default)
  159. [   72.643733] isapnp: Scanning for PnP cards...
  160. [   73.000500] isapnp: No Plug & Play device found
  161. [   73.028483] Real Time Clock Driver v1.12ac
  162. [   73.028535] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
  163. [   73.028659] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  164. [   73.029398] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  165. [   73.029657] mice: PS/2 mouse device common for all mice
  166. [   73.030189] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
  167. [   73.030346] input: Macintosh mouse button emulation as /class/input/input0
  168. [   73.030419] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
  169. [   73.030423] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
  170. [   73.030748] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
  171. [   73.031174] serio: i8042 KBD port at 0x60,0x64 irq 1
  172. [   73.031225] serio: i8042 AUX port at 0x60,0x64 irq 12
  173. [   73.031302] EISA: Probing bus 0 at eisa.0
  174. [   73.031342] EISA: Detected 0 cards.
  175. [   73.047520] input: AT Translated Set 2 keyboard as /class/input/input1
  176. [   73.061414] TCP cubic registered
  177. [   73.061423] NET: Registered protocol family 1
  178. [   73.061443] Using IPI No-Shortcut mode
  179. [   73.061502] ACPI: (supports S0 S1 S3 S4 S5)
  180. [   73.061528] Time: tsc clocksource has been installed.
  181. [   73.061555]   Magic number: 15:891:643
  182. [   73.061979] Freeing unused kernel memory: 328k freed
  183. [   74.348448] Capability LSM initialized
  184. [   74.427572] ACPI: Processor [CPU1] (supports 16 throttling states)
  185. [   75.233468] SCSI subsystem initialized
  186. [   75.238482] libata version 2.20 loaded.
  187. [   75.239846] sata_via 0000:00:0f.0: version 2.1
  188. [   75.239883] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 16
  189. [   75.239905] sata_via 0000:00:0f.0: routed to hard irq line 11
  190. [   75.239964] ata1: SATA max UDMA/133 cmd 0x0001ec00 ctl 0x0001e802 bmdma 0x0001dc00 irq 16
  191. [   75.239996] ata2: SATA max UDMA/133 cmd 0x0001e400 ctl 0x0001e002 bmdma 0x0001dc08 irq 16
  192. [   75.240014] scsi0 : sata_via
  193. [   75.258583] usbcore: registered new interface driver usbfs
  194. [   75.258608] usbcore: registered new interface driver hub
  195. [   75.258631] usbcore: registered new device driver usb
  196. [   75.259580] USB Universal Host Controller Interface driver v3.0
  197. [   75.340801] via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
  198. [   75.440851] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  199. [   75.478473] Floppy drive(s): fd0 is 1.44M
  200. [   75.515927] FDC 0 is a post-1991 82077
  201. [   75.603185] ATA: abnormal status 0x7F on port 0x0001ec07
  202. [   75.614815] ATA: abnormal status 0x7F on port 0x0001ec07
  203. [   75.618699] ata1.00: ata_hpa_resize 1: sectors = 160086528, hpa_sectors = 160086528
  204. [   75.618705] ata1.00: ATA-7: Maxtor 6L080M0, BACE1G20, max UDMA/133
  205. [   75.618708] ata1.00: 160086528 sectors, multi 16: LBA NCQ (depth 0/32)
  206. [   75.623676] ata1.00: ata_hpa_resize 1: sectors = 160086528, hpa_sectors = 160086528
  207. [   75.623680] ata1.00: configured for UDMA/133
  208. [   75.623692] scsi1 : sata_via
  209. [   75.824121] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
  210. [   75.835721] ATA: abnormal status 0x7F on port 0x0001e407
  211. [   75.835870] scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6L080M0   BACE PQ: 0 ANSI: 5
  212. [   75.840228] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
  213. [   75.840252] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 16
  214. [   75.840265] VP_IDE: chipset revision 6
  215. [   75.840267] VP_IDE: not 100% native mode: will probe irqs later
  216. [   75.840281] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
  217. [   75.840290]     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
  218. [   75.840303]     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
  219. [   75.840315] Probing IDE interface ide0...
  220. [   75.865019] SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
  221. [   75.865837] sda: Write Protect is off
  222. [   75.865841] sda: Mode Sense: 00 3a 00 00
  223. [   75.866362] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  224. [   75.866436] SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
  225. [   75.866448] sda: Write Protect is off
  226. [   75.866450] sda: Mode Sense: 00 3a 00 00
  227. [   75.866466] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  228. [   75.866470]  sda: sda1 sda2 < sda5 >
  229. [   75.907857] sd 0:0:0:0: Attached scsi disk sda
  230. [   75.913352] sd 0:0:0:0: Attached scsi generic sg0 type 0
  231. [   76.173673] Attempting manual resume
  232. [   76.173677] swsusp: Resume From Partition 8:5
  233. [   76.173679] PM: Checking swsusp image.
  234. [   76.173862] PM: Resume from disk failed.
  235. [   76.204883] kjournald starting.  Commit interval 5 seconds
  236. [   76.204897] EXT3-fs: mounted filesystem with ordered data mode.
  237. [   76.632710] hda: CD-532E-A, ATAPI CD/DVD-ROM drive
  238. [   77.347371] hdb: _NEC DVD_RW ND-4550A, ATAPI CD/DVD-ROM drive
  239. [   77.399483] hda: Disabling (U)DMA for CD-532E-A (blacklisted)
  240. [   77.402062] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
  241. [   77.408994] Probing IDE interface ide1...
  242. [   77.796523] hdc: ST3120022A, ATA DISK drive
  243. [   78.408831] ide1 at 0x170-0x177,0x376 on irq 15
  244. [   78.412946] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 17
  245. [   78.412963] uhci_hcd 0000:00:10.0: UHCI Host Controller
  246. [   78.413170] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
  247. [   78.413207] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000d400
  248. [   78.413344] usb usb1: configuration #1 chosen from 1 choice
  249. [   78.413371] hub 1-0:1.0: USB hub found
  250. [   78.413379] hub 1-0:1.0: 2 ports detected
  251. [   78.514224] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 17
  252. [   78.514240] uhci_hcd 0000:00:10.1: UHCI Host Controller
  253. [   78.514262] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
  254. [   78.514288] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000d000
  255. [   78.514392] usb usb2: configuration #1 chosen from 1 choice
  256. [   78.514419] hub 2-0:1.0: USB hub found
  257. [   78.514426] hub 2-0:1.0: 2 ports detected
  258. [   78.615985] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 17
  259. [   78.615998] uhci_hcd 0000:00:10.2: UHCI Host Controller
  260. [   78.616020] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
  261. [   78.616047] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000cc00
  262. [   78.616143] usb usb3: configuration #1 chosen from 1 choice
  263. [   78.616167] hub 3-0:1.0: USB hub found
  264. [   78.616175] hub 3-0:1.0: 2 ports detected
  265. [   78.717799] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 17
  266. [   78.717815] uhci_hcd 0000:00:10.3: UHCI Host Controller
  267. [   78.717840] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
  268. [   78.717868] uhci_hcd 0000:00:10.3: irq 17, io base 0x0000c800
  269. [   78.717962] usb usb4: configuration #1 chosen from 1 choice
  270. [   78.717986] hub 4-0:1.0: USB hub found
  271. [   78.717994] hub 4-0:1.0: 2 ports detected
  272. [   78.818801] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 17
  273. [   78.818816] ehci_hcd 0000:00:10.4: EHCI Host Controller
  274. [   78.818850] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
  275. [   78.818895] ehci_hcd 0000:00:10.4: irq 17, io mem 0xff6ffc00
  276. [   78.818903] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  277. [   78.818989] usb usb5: configuration #1 chosen from 1 choice
  278. [   78.819015] hub 5-0:1.0: USB hub found
  279. [   78.819023] hub 5-0:1.0: 8 ports detected
  280. [   78.920584] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 18
  281. [   78.920681] eth0: VIA Rhine II at 0x1c000, 00:13:d3:a8:b1:9b, IRQ 18.
  282. [   78.921401] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
  283. [   79.550117] usb 5-8: new high speed USB device using ehci_hcd and address 2
  284. [   79.664331] usb 5-8: configuration #1 chosen from 1 choice
  285. [   79.664386] hub 5-8:1.0: USB hub found
  286. [   79.664488] hub 5-8:1.0: 6 ports detected
  287. [   79.933500] usb 5-8.3: new full speed USB device using ehci_hcd and address 3
  288. [   80.009587] usb 5-8.3: configuration #1 chosen from 1 choice
  289. [   80.176164] usb 5-8.4: new full speed USB device using ehci_hcd and address 4
  290. [   80.251764] usb 5-8.4: configuration #1 chosen from 1 choice
  291. [   80.251953] hub 5-8.4:1.0: USB hub found
  292. [   80.252053] hub 5-8.4:1.0: 3 ports detected
  293. [   80.530550] usb 5-8.5: new full speed USB device using ehci_hcd and address 5
  294. [   83.599771] usb 5-8.5: device descriptor read/64, error -110
  295. [   84.419969] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
  296. [   85.761192] NET: Registered protocol family 17
  297. [   87.006412] Linux agpgart interface v0.102 (c) Dave Jones
  298. [   87.135596] agpgart: Detected AGP bridge 0
  299. [   87.144158] agpgart: AGP aperture is 128M @ 0xd0000000
  300. [   87.229643] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  301. [   87.234835] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  302. [   87.564238] input: PC Speaker as /class/input/input2
  303. [   87.647539] hda: ATAPI 32X CD-ROM drive, 128kB Cache
  304. [   87.647548] Uniform CD-ROM driver Revision: 3.20
  305. [   87.650881] hdb: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
  306. [   88.033878] parport: PnPBIOS parport detected.
  307. [   88.033926] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
  308. [   88.206403] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 19
  309. [   88.206554] PCI: Setting latency timer of device 0000:00:11.5 to 64
  310. [   88.270435] Linux video capture interface: v2.00
  311. [   88.385858] input: PS/2 Generic Mouse as /class/input/input3
  312. [   92.990639] hdc: max request size: 512KiB
  313. [   93.012048] hdc: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
  314. [   93.012326] hdc: cache flushes supported
  315. [   93.012382]  hdc: hdc1
  316. [   98.737413] usb 5-8.5: device descriptor read/64, error -110
  317. [   98.900062] usb 5-8.5: new full speed USB device using ehci_hcd and address 6
  318. [  101.956434] usb 5-8.5: device descriptor read/64, error -110
  319. [  117.093981] usb 5-8.5: device descriptor read/64, error -110
  320. [  117.256768] usb 5-8.5: new full speed USB device using ehci_hcd and address 7
  321. [  127.644201] usb 5-8.5: device not accepting address 7, error -110
  322. [  127.708178] usb 5-8.5: new full speed USB device using ehci_hcd and address 8
  323. [  138.093667] usb 5-8.5: device not accepting address 8, error -110
  324. [  138.263423] usb 5-8.6: new high speed USB device using ehci_hcd and address 9
  325. [  138.339683] usb 5-8.6: configuration #1 chosen from 1 choice
  326. [  138.507079] usb 5-8.1: new low speed USB device using ehci_hcd and address 10
  327. [  138.588945] usb 5-8.1: configuration #1 chosen from 1 choice
  328. [  138.630041] ubuntu/media/gspcav1/gspca_core.c: USB SPCA5XX camera found. (PAC207)
  329. [  138.756718] usb 5-8.4.2: new full speed USB device using ehci_hcd and address 11
  330. [  138.838562] usb 5-8.4.2: configuration #1 chosen from 1 choice
  331. [  139.006236] usb 5-8.4.3: new full speed USB device using ehci_hcd and address 12
  332. [  139.089221] usb 5-8.4.3: configuration #1 chosen from 1 choice
  333. [  139.090586] usbcore: registered new interface driver gspca
  334. [  139.090592] ubuntu/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
  335. [  139.091304] usbcore: registered new interface driver hiddev
  336. [  139.095901] input: PS/2+USB Mouse as /class/input/input4
  337. [  139.096001] input: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:10.4-8.1
  338. [  139.098340] input: Logitech Logitech BT Mini-Receiver as /class/input/input5
  339. [  139.098396] input: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:10.4-8.4.2
  340. [  139.104661] input: Logitech Logitech BT Mini-Receiver as /class/input/input6
  341. [  139.104850] input,hiddev96: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:10.4-8.4.3
  342. [  139.104868] usbcore: registered new interface driver usbhid
  343. [  139.104872] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
  344. [  139.573106] fuse init (API version 7.8)
  345. [  139.614797] lp0: using parport0 (interrupt-driven).
  346. [  139.647594] usbcore: registered new interface driver snd-usb-audio
  347. [  139.771844] Adding 3028212k swap on /dev/disk/by-uuid/f978a60e-6a8b-4438-9776-fb3fec72d92a.  Priority:-1 extents:1 across:3028212k
  348. [  139.903580] EXT3 FS on sda1, internal journal
  349. [  140.201991] NET: Registered protocol family 10
  350. [  140.202093] lo: Disabled Privacy Extensions
  351. [  146.166973] input: Power Button (FF) as /class/input/input7
  352. [  146.172425] ACPI: Power Button (FF) [PWRF]
  353. [  146.209180] input: Sleep Button (CM) as /class/input/input8
  354. [  146.214631] ACPI: Sleep Button (CM) [SLPB]
  355. [  146.251236] input: Power Button (CM) as /class/input/input9
  356. [  146.256674] ACPI: Power Button (CM) [PWRB]
  357. [  146.281602] ibm_acpi: ec object not found
  358. [  146.332416] Using specific hotkey driver
  359. [  146.379246] No dock devices found.
  360. [  146.516551] pcc_acpi: loading...
  361. [  146.777421] powernow-k8: Power state transitions not supported
  362. [  150.723303] eth0: no IPv6 routers present
  363. [  157.537068] hdb: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
  364. [  157.537078] hdb: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
  365. [  157.537083] ide: failed opcode was: unknown
  366. [  157.738114] hdb: error code: 0x70  sense_key: 0x03  asc: 0x02  ascq: 0x00
  367. [  157.738120] end_request: I/O error, dev hdb, sector 64
  368. [  157.738125] Buffer I/O error on device hdb, logical block 8
  369. [  160.877830] [drm] Initialized drm 1.1.0 20060810
  370. [  160.885955] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
  371. [  160.889656] [drm] Initialized radeon 1.25.0 20060524 on minor 0
  372. [  162.463361] ppdev: user-space parallel port driver
  373. [  163.648969] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
  374. [  163.649091] agpgart: BIOS bug. AGP bridge claims to only support x4 rateFixing up support for x2 & x1
  375. [  163.649232] agpgart: Device is in legacy mode, falling back to 2.x
  376. [  163.649323] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
  377. [  163.649485] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
  378. [  164.090347] [drm] Setting GART location based on new memory map
  379. [  164.090535] [drm] writeback test succeeded in 1 usecs
  380. [  164.260842] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
  381. [  164.261176] apm: overridden by ACPI.
  382. [  175.709640] eth0: no IPv6 routers present
  383. [  193.323844] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  384. [  193.328331] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  385. [  193.332952] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  386. [  193.337205] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  387. [  193.341567] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  388. [  193.345805] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  389. [  193.401214] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  390. [  193.405333] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  391. [  193.409330] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  392. [  193.413325] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  393. [  193.417324] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  394. [  193.421315] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  395. [14848.662106] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  396. [14848.670214] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  397. [14848.677456] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  398. [14848.681571] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  399. [14848.685816] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  400. [14848.689810] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  401. [14848.778787] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  402. [14848.783285] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  403. [14848.787400] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  404. [14848.791771] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  405. [14848.797644] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  406. [14848.801759] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  407. [19732.464623] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  408. [19732.469500] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  409. [19732.476950] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  410. [19732.481487] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  411. [19732.489377] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  412. [19732.495339] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  413. [19732.557101] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  414. [19732.562689] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  415. [19732.569214] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  416. [19732.573450] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  417. [19732.578827] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  418. [19732.582946] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  419. [57984.045489] TCP: Treason uncloaked! Peer 86.215.136.190:53724/4642 shrinks window 4079432690:4079435660. Repaired.
  420. [62257.641927] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  421. [62257.646165] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  422. [62257.650278] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  423. [62257.655160] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  424. [62257.659397] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  425. [62257.680461] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  426. [62257.736287] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  427. [62257.740402] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  428. [62257.744771] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  429. [62257.749637] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  430. [62257.753643] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  431. [62257.759003] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  432. [85317.304231] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  433. [85317.308486] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  434. [85317.312476] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  435. [85317.316970] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  436. [85317.321097] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  437. [85317.325336] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  438. [85317.380254] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  439. [85317.384499] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  440. [85317.388990] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  441. [85317.393609] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  442. [85317.397734] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  443. [85317.401975] ubuntu/media/gspcav1/gspca_core.c: init isoc: usb_submit_urb(0) ret -28
  444. [86342.912870] usbcore: deregistering interface driver snd-usb-audio
  445. [86342.935839] ACPI: PCI interrupt for device 0000:00:11.5 disabled
  446. [96077.289098] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 19
  447. [96077.289209] PCI: Setting latency timer of device 0000:00:11.5 to 64

advertising

Update the Post

Either update this post and resubmit it with changes, or make a new post.

You may also comment on this post.

update paste below
details of the post (optional)

Note: Only the paste content is required, though the following information can be useful to others.

Save name / title?

(space separated, optional)



Please note that information posted here will not expire by default. If you do not want it to expire, please set the expiry time above. If it is set to expire, web search engines will not be allowed to index it prior to it expiring. Items that are not marked to expire will be indexable by search engines. Be careful with your passwords. All illegal activities will be reported and any information will be handed over to the authorities, so be good.

comments powered by Disqus
worth-right
worth-right
worth-right