Advertising
- Anonymous
- Wednesday, February 21st, 2007 at 6:11:17am UTC
- 1,5c1
- < ;; This buffer is for notes you don't want to save, and for Lisp evaluation.
- < ;; If you want to create a file, visit that file with C-x C-f,
- < ;; then enter the text in that file's own buffer.
- <
- < eb 17 23:01:20 temnozor syslogd 1.4.1#18ubuntu6: restart.
- ---
- > temnozor syslogd 1.4.1#18ubuntu6: restart.
- 42c38
- < temnozor kernel: [ ] Detected 1789.056 MHz processor.
- ---
- > temnozor kernel: [ ] Detected 1789.094 MHz processor.
- 49c45
- < temnozor kernel: [ ] Calibrating delay using timer specific routine.. 3580.24 BogoMIPS (lpj=7160488)
- ---
- > temnozor kernel: [ ] Calibrating delay using timer specific routine.. 3580.25 BogoMIPS (lpj=7160512)
- 192,194d187
- < temnozor kernel: [ ] ieee1394: Initialized config rom entry `ip1394'
- < temnozor kernel: [ ] ACPI: PCI Interrupt 0000:00:0a.1[A] -> Link [LNK2] -> GSI 10 (level, low) -> IRQ 10
- < temnozor kernel: [ ] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[d000c000-d000c7ff] Max Packet=[2048] IR/IT contexts=[4/4]
- 197d189
- < temnozor kernel: [ ] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
- 199a192,212
- > temnozor kernel: [ ] ACPI: PCI Interrupt 0000:00:0d.2[C] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11
- > temnozor kernel: [ ] ehci_hcd 0000:00:0d.2: EHCI Host Controller
- > temnozor kernel: [ ] ehci_hcd 0000:00:0d.2: new USB bus registered, assigned bus number 1
- > temnozor kernel: [ ] ieee1394: Initialized config rom entry `ip1394'
- > temnozor kernel: [ ] ehci_hcd 0000:00:0d.2: irq 11, io mem 0xd000c800
- > temnozor kernel: [ ] ehci_hcd 0000:00:0d.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
- > temnozor kernel: [ ] usb usb1: configuration #1 chosen from 1 choice
- > temnozor kernel: [ ] hub 1-0:1.0: USB hub found
- > temnozor kernel: [ ] hub 1-0:1.0: 5 ports detected
- > temnozor kernel: [ ] ACPI: PCI Interrupt 0000:00:0a.1[A] -> Link [LNK2] -> GSI 10 (level, low) -> IRQ 10
- > temnozor kernel: [ ] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[d000c000-d000c7ff] Max Packet=[2048] IR/IT contexts=[4/4]
- > temnozor kernel: [ ] irq 11: nobody cared (try booting with the "irqpoll" option)
- > temnozor kernel: [ ] <c01499a4> __report_bad_irq+0x24/0x80 <c0149a9d> note_interrupt+0x9d/0x270
- > temnozor kernel: [ ] <dc8b0854> usb_hcd_irq+0x24/0x60 [usbcore] <c0149323> handle_IRQ_event+0x33/0x60
- > temnozor kernel: [ ] <c0149448> __do_IRQ+0xf8/0x110 <c0105c89> do_IRQ+0x19/0x30
- > temnozor kernel: [ ] <c010408a> common_interrupt+0x1a/0x20
- > temnozor kernel: [ ] handlers:
- > temnozor kernel: [ ] [pg0+474040368/1068901376] (usb_hcd_irq+0x0/0x60 [usbcore])
- > temnozor kernel: [ ] Disabling IRQ #11
- > temnozor kernel: [ ] usb 1-1: new high speed USB device using ehci_hcd and address 2
- > temnozor kernel: [ ] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
- 202c215
- < temnozor kernel: [ ] ohci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
- ---
- > temnozor kernel: [ ] ohci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
- 204,206c217,219
- < temnozor kernel: [ ] usb usb1: configuration #1 chosen from 1 choice
- < temnozor kernel: [ ] hub 1-0:1.0: USB hub found
- < temnozor kernel: [ ] hub 1-0:1.0: 3 ports detected
- ---
- > temnozor kernel: [ ] usb usb2: configuration #1 chosen from 1 choice
- > temnozor kernel: [ ] hub 2-0:1.0: USB hub found
- > temnozor kernel: [ ] hub 2-0:1.0: 3 ports detected
- 209c222
- < temnozor kernel: [ ] ohci_hcd 0000:00:0d.1: new USB bus registered, assigned bus number 2
- ---
- > temnozor kernel: [ ] ohci_hcd 0000:00:0d.1: new USB bus registered, assigned bus number 3
- 211,218d223
- < temnozor kernel: [ ] usb usb2: configuration #1 chosen from 1 choice
- < temnozor kernel: [ ] hub 2-0:1.0: USB hub found
- < temnozor kernel: [ ] hub 2-0:1.0: 2 ports detected
- < temnozor kernel: [ ] ACPI: PCI Interrupt 0000:00:0d.2[C] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11
- < temnozor kernel: [ ] ehci_hcd 0000:00:0d.2: EHCI Host Controller
- < temnozor kernel: [ ] ehci_hcd 0000:00:0d.2: new USB bus registered, assigned bus number 3
- < temnozor kernel: [ ] ehci_hcd 0000:00:0d.2: irq 11, io mem 0xd000c800
- < temnozor kernel: [ ] ehci_hcd 0000:00:0d.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
- 221c226
- < temnozor kernel: [ ] hub 3-0:1.0: 5 ports detected
- ---
- > temnozor kernel: [ ] hub 3-0:1.0: 2 ports detected
- 224,227d228
- < temnozor kernel: [ ] usb 3-1: new high speed USB device using ehci_hcd and address 2
- < temnozor kernel: [ ] usb 3-1: configuration #1 chosen from 1 choice
- < temnozor kernel: [ ] hub 3-1:1.0: USB hub found
- < temnozor kernel: [ ] hub 3-1:1.0: 7 ports detected
- 233,242d233
- < temnozor kernel: [ ] usb 3-1.4: new full speed USB device using ehci_hcd and address 3
- < temnozor kernel: [ ] usb 3-1.4: configuration #1 chosen from 1 choice
- < temnozor kernel: [ ] usb 3-1.5: new full speed USB device using ehci_hcd and address 4
- < temnozor kernel: [ ] usb 3-1.5: configuration #1 chosen from 1 choice
- < temnozor kernel: [ ] usb 3-1.7: new low speed USB device using ehci_hcd and address 5
- < temnozor kernel: [ ] usb 3-1.7: configuration #1 chosen from 1 choice
- < temnozor kernel: [ ] Linux agpgart interface v0.101 (c) Dave Jones
- < temnozor kernel: [ ] agpgart: Detected Ati IGP320/M chipset
- < temnozor kernel: [ ] agpgart: AGP aperture is 64M @ 0xd4000000
- < temnozor kernel: [ ] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- 244,253d234
- < temnozor kernel: [ ] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- < temnozor kernel: [ ] b44.c:v1.00 (Apr 7, 2006)
- < temnozor kernel: [ ] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
- < temnozor kernel: [ ] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11
- < temnozor kernel: [ ] eth0: Broadcom 4400 10/100BaseT Ethernet 00:03:25:0b:91:06
- < temnozor kernel: [ ] ieee80211_crypt: registered algorithm 'NULL'
- < temnozor kernel: [ ] ieee80211: 802.11 data/management/control stack, git-1.1.13
- < temnozor kernel: [ ] bcm43xx driver
- < temnozor kernel: [ ] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNK2] -> GSI 10 (level, low) -> IRQ 10
- 259a241
- > temnozor kernel: [ ] atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
- 262,263d243
- < temnozor kernel: [ ] parport: PnPBIOS parport detected.
- < temnozor kernel: [ ] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
- 266,270c246,249
- < temnozor kernel: [ ] ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 11
- < temnozor kernel: [ ] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNK7] -> GSI 11 (level, low) -> IRQ 11
- < temnozor kernel: [ ] atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
- < temnozor kernel: [ ] usbcore: registered new driver snd-usb-audio
- < temnozor kernel: [ ] usbcore: registered new driver hiddev
- ---
- > temnozor kernel: [ ] b44.c:v1.00 (Apr 7, 2006)
- > temnozor kernel: [ ] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
- > temnozor kernel: [ ] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11
- > temnozor kernel: [ ] eth0: Broadcom 4400 10/100BaseT Ethernet 00:03:25:0b:91:06
- 271a251,253
- > temnozor kernel: [ ] parport: PnPBIOS parport detected.
- > temnozor kernel: [ ] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
- > temnozor kernel: [ ] Linux agpgart interface v0.101 (c) Dave Jones
- 273c255,266
- < temnozor kernel: [ ] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f
- ---
- > temnozor kernel: [ ] agpgart: Detected Ati IGP320/M chipset
- > temnozor kernel: [ ] agpgart: AGP aperture is 64M @ 0xd4000000
- > temnozor kernel: [ ] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- > temnozor kernel: [ ] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- > temnozor kernel: [ ] ieee80211_crypt: registered algorithm 'NULL'
- > temnozor kernel: [ ] ieee80211: 802.11 data/management/control stack, git-1.1.13
- > temnozor kernel: [ ] ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 11
- > temnozor kernel: [ ] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNK7] -> GSI 11 (level, low) -> IRQ 11
- > temnozor kernel: [ ] bcm43xx driver
- > temnozor kernel: [ ] ts: Compaq touchscreen protocol output
- > temnozor kernel: [ ] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
- 278d270
- < temnozor kernel: [ ] ts: Compaq touchscreen protocol output
- 279a272,273
- > temnozor kernel: [ ] usb 1-1: device not accepting address 2, error -110
- > temnozor kernel: [ ] usb 1-1: new high speed USB device using ehci_hcd and address 3
- 285,296c279
- < temnozor kernel: [ ] drivers/usb/input/hid-core.c: timeout initializing reports
- < temnozor kernel: [ ] hiddev96: USB HID v1.10 Device [BeyondTel USB Phone] on usb-0000:00:0d.2-1.4
- < temnozor kernel: [ ] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0818
- < temnozor kernel: [ ] input: Microsoft Microsoft Wireless Optical Mouse® 1.0A as /class/input/input3
- < temnozor kernel: [ ] input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:0d.2-1.7
- < temnozor kernel: [ ] usbcore: registered new driver usbhid
- < temnozor kernel: [ ] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
- < temnozor kernel: [ ] usbcore: registered new driver usblp
- < temnozor kernel: [ ] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
- < temnozor kernel: [ ] NET: Registered protocol family 10
- < temnozor kernel: [ ] lo: Disabled Privacy Extensions
- < temnozor kernel: [ ] IPv6 over IPv4 tunneling driver
- ---
- > temnozor kernel: [ ] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNK2] -> GSI 10 (level, low) -> IRQ 10
- 302c285,289
- < temnozor kernel: [ ] eth1: no IPv6 routers present
- ---
- > temnozor kernel: [ ] usb 1-1: device not accepting address 3, error -110
- > temnozor kernel: [ ] usb 1-1: new high speed USB device using ehci_hcd and address 4
- > temnozor kernel: [ ] usb 1-1: device not accepting address 4, error -110
- > temnozor kernel: [ ] usb 1-1: new high speed USB device using ehci_hcd and address 5
- > temnozor kernel: [ ] usb 1-1: device not accepting address 5, error -110
- 336,344c323,353
- < temnozor anacron[4212]: Anacron 2.3 started on 2007-02-17
- < temnozor anacron[4212]: Will run job `cron.daily' in 5 min.
- < temnozor anacron[4212]: Jobs will be executed sequentially
- < temnozor /usr/sbin/cron[4238]: (CRON) INFO (pidfile fd = 3)
- < temnozor /usr/sbin/cron[4239]: (CRON) STARTUP (fork ok)
- < temnozor /usr/sbin/cron[4239]: (CRON) INFO (Running @reboot jobs)
- < temnozor anacron[4212]: Job `cron.daily' started
- < temnozor anacron[4407]: Updated timestamp for job `cron.daily' to 2007-02-17
- < temnozor exiting on signal 15
- ---
- > temnozor dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 17
- > temnozor anacron[4082]: Anacron 2.3 started on 2007-02-17
- > temnozor anacron[4082]: Will run job `cron.daily' in 5 min.
- > temnozor anacron[4082]: Jobs will be executed sequentially
- > temnozor /usr/sbin/cron[4108]: (CRON) INFO (pidfile fd = 3)
- > temnozor /usr/sbin/cron[4109]: (CRON) STARTUP (fork ok)
- > temnozor /usr/sbin/cron[4109]: (CRON) INFO (Running @reboot jobs)
- > temnozor dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 4
- > temnozor dhclient: No DHCPOFFERS received.
- > temnozor dhclient: No working leases in persistent database - sleeping.
- > temnozor ntpdate[4199]: can't find host ntp.ubuntu.com
- > temnozor ntpdate[4199]: no servers can be used, exiting
- > temnozor kernel: [ ] NET: Registered protocol family 10
- > temnozor kernel: [ ] lo: Disabled Privacy Extensions
- > temnozor kernel: [ ] IPv6 over IPv4 tunneling driver
- > temnozor gconfd (cryosphere-4285): starting (version 2.16.0), pid 4285 user 'cryosphere'
- > temnozor gconfd (cryosphere-4285): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
- > temnozor gconfd (cryosphere-4285): Resolved address "xml:readwrite:/home/cryosphere/.gconf" to a writable configuration source at position 1
- > temnozor gconfd (cryosphere-4285): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
- > temnozor gconfd (cryosphere-4285): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3
- > temnozor gconfd (cryosphere-4285): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4
- > temnozor kernel: [ ] eth1: no IPv6 routers present
- > temnozor gconfd (cryosphere-4285): GConf server is not in use, shutting down.
- > temnozor gconfd (cryosphere-4285): Exiting
- > temnozor init: tty1 process (3462) killed by signal 15
- > temnozor init: tty2 process (3463) killed by signal 15
- > temnozor init: tty3 process (3464) killed by signal 15
- > temnozor init: tty4 process (3465) killed by signal 15
- > temnozor init: tty5 process (3466) killed by signal 15
- > temnozor init: tty6 process (3467) killed by signal 15
- > temnozor gdm[3851]: GDM detected a halt or restart in progress.
- \ No newline at end of file
advertising
Update the Post
Either update this post and resubmit it with changes, or make a new post.
You may also comment on this post.
Please note that information posted here will not expire by default. If you do not want it to expire, please set the expiry time above. If it is set to expire, web search engines will not be allowed to index it prior to it expiring. Items that are not marked to expire will be indexable by search engines. Be careful with your passwords. All illegal activities will be reported and any information will be handed over to the authorities, so be good.