Advertising
- Unnamed
- Sunday, February 18th, 2007 at 8:05:33am UTC
- # hdparm -I /dev/sda
- /dev/sda:
- ATA device, with non-removable media
- Model Number: SAMSUNG HD300LJ
- Serial Number: S0D7J13LB08983
- Firmware Revision: ZT100-13
- Standards:
- Used: ATA/ATAPI-7 T13 1532D revision 4a
- Supported: 7 6 5 4
- Configuration:
- Logical max current
- cylinders 16383 16383
- heads 16 16
- sectors/track 63 63
- --
- CHS current addressable sectors: 16514064
- LBA user addressable sectors: 268435455
- LBA48 user addressable sectors: 586072368
- device size with M = 1024*1024: 286168 MBytes
- device size with M = 1000*1000: 300069 MBytes (300 GB)
- Capabilities:
- LBA, IORDY(can be disabled)
- Queue depth: 32
- Standby timer values: spec'd by Standard, no device specific minimum
- R/W multiple sector transfer: Max = 16 Current = 16
- Recommended acoustic management value: 254, current value: 0
- DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 udma7
- Cycle time: min=120ns recommended=120ns
- PIO: pio0 pio1 pio2 pio3 pio4
- Cycle time: no flow control=120ns IORDY flow control=120ns
- Commands/features:
- Enabled Supported:
- * SMART feature set
- Security Mode feature set
- * Power Management feature set
- * Write cache
- * Look-ahead
- * Host Protected Area feature set
- * WRITE_BUFFER command
- * READ_BUFFER command
- * NOP cmd
- * DOWNLOAD_MICROCODE
- SET_MAX security extension
- Automatic Acoustic Management feature set
- * 48-bit Address feature set
- * Device Configuration Overlay feature set
- * Mandatory FLUSH_CACHE
- * FLUSH_CACHE_EXT
- * SMART error logging
- * SMART self-test
- * General Purpose Logging feature set
- * SATA-I signaling speed (1.5Gb/s)
- * SATA-II signaling speed (3.0Gb/s)
- * Native Command Queueing (NCQ)
- * Host-initiated interface power management
- * Phy event counters
- DMA Setup Auto-Activate optimization
- Device-initiated interface power management
- * Software settings preservation
- * SMART Command Transport (SCT) feature set
- * SCT Long Sector Access (AC1)
- * SCT LBA Segment Access (AC2)
- * SCT Error Recovery Control (AC3)
- * SCT Features Control (AC4)
- * SCT Data Tables (AC5)
- Security:
- Master password revision code = 65534
- supported
- not enabled
- not locked
- not frozen
- not expired: security count
- supported: enhanced erase
- 228min for SECURITY ERASE UNIT. 228min for ENHANCED SECURITY ERASE UNIT.
- Checksum: correct
advertising
Update the Post
Either update this post and resubmit it with changes, or make a new post.
You may also comment on this post.
Please note that information posted here will not expire by default. If you do not want it to expire, please set the expiry time above. If it is set to expire, web search engines will not be allowed to index it prior to it expiring. Items that are not marked to expire will be indexable by search engines. Be careful with your passwords. All illegal activities will be reported and any information will be handed over to the authorities, so be good.