Advertising
- Someone
- Tuesday, February 13th, 2007 at 11:50:23pm UTC
- Now follows a summary of the probes I have just done.
- Just press ENTER to continue:
- Driver `eeprom' (should be inserted):
- Detects correctly:
- * Bus `NVIDIA I2C Device'
- Busdriver `UNKNOWN', I2C address 0x50 (and 0x51 0x52 0x53 0x54 0x55 0x56 0x57)
- Chip `DDC monitor' (confidence: 8)
- Driver `it87' (should be inserted):
- Detects correctly:
- * ISA bus address 0x0290 (Busdriver `i2c-isa')
- Chip `ITE IT8712F' (confidence: 8)
- I will now generate the commands needed to load the I2C modules.
- To make the sensors modules behave correctly, add these lines to
- /etc/modules:
- #----cut here----
- # I2C adapter drivers
- # modprobe unknown adapter NVIDIA I2C Device
- # modprobe unknown adapter NVIDIA I2C Device
- # modprobe unknown adapter NVIDIA I2C Device
- i2c-isa
- # I2C chip drivers
- eeprom
- it87
- #----cut here----
advertising
Update the Post
Either update this post and resubmit it with changes, or make a new post.
You may also comment on this post.
Please note that information posted here will not expire by default. If you do not want it to expire, please set the expiry time above. If it is set to expire, web search engines will not be allowed to index it prior to it expiring. Items that are not marked to expire will be indexable by search engines. Be careful with your passwords. All illegal activities will be reported and any information will be handed over to the authorities, so be good.
