Mine

line - -1 looking for toolchange
type - (null) file - (null) offset - 1073741824 sequence - 0 repeat-0
line - -1 looking for toolchange#100
type - (null) file - (null) offset - 1073741824 sequence - 0 repeat-0
line - -1 looking for toolchange#100
type - (null) file - (null) offset - 1073741824 sequence - 0 repeat-0
line - -1 looking for toolchange#100
type - O_if file - /home/andypugh/linuxcnc-dev/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc offset - 242 sequence - 9 repeat--1
line - -1 looking for toolchange#200
type - (null) file - (null) offset - 1073741824 sequence - 0 repeat-0
line - -1 looking for toolchange#200
type - (null) file - (null) offset - 1073741824 sequence - 0 repeat-0
line - -1 looking for toolchange#106
type - (null) file - (null) offset - 1073741824 sequence - 0 repeat-0
line - -1 looking for toolchange#106
type - (null) file - (null) offset - 1073741824 sequence - 0 repeat-0
line - -1 looking for toolchange#106
type - O_if file - /home/andypugh/linuxcnc-dev/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc offset - 767 sequence - 0 repeat--1
line - -1 looking for toolchange#107
type - (null) file - (null) offset - 1073741824 sequence - 0 repeat-0
line - -1 looking for toolchange#107
type - (null) file - (null) offset - 1073741824 sequence - 0 repeat-0
line - -1 looking for toolchange#107
type - O_if file - /home/andypugh/linuxcnc-dev/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc offset - 1014 sequence - 0 repeat--1
line - -1 looking for toolchange#108
type - (null) file - (null) offset - 1073741824 sequence - 0 repeat-0
line - -1 looking for toolchange#108
type - (null) file - (null) offset - 1073741824 sequence - 0 repeat-0
line - -1 looking for toolchange#108
type - O_if file - /home/andypugh/linuxcnc-dev/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc offset - 1189 sequence - 0 repeat--1
line - -1 looking for toolchange#109
type - (null) file - (null) offset - 1073741824 sequence - 0 repeat-0
line - -1 looking for toolchange#109
type - (null) file - (null) offset - 1073741824 sequence - 0 repeat-0
line - -1 looking for toolchange#109
type - O_if file - /home/andypugh/linuxcnc-dev/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc offset - 1360 sequence - 0 repeat--1
line - -1 looking for toolchange#200
type - O_if file - /home/andypugh/linuxcnc-dev/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc offset - 647 sequence - 29 repeat--1
line - -1 looking for toolchange#110
type - (null) file - (null) offset - 1073741824 sequence - 0 repeat-0
line - -1 looking for toolchange#110
type - (null) file - (null) offset - 1073741824 sequence - 0 repeat-0
line - -1 looking for toolchange#110
type - O_if file - /home/andypugh/linuxcnc-dev/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc offset - 1556 sequence - 0 repeat--1
line - -1 looking for toolchange#111
type - (null) file - (null) offset - 1073741824 sequence - 0 repeat-0
line - -1 looking for toolchange#111
type - (null) file - (null) offset - 1073741824 sequence - 0 repeat-0
line - -1 looking for toolchange#111
type - O_if file - /home/andypugh/linuxcnc-dev/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc offset - 1689 sequence - 0 repeat--1
line - -1 looking for toolchange#100
type - O_if file - /home/andypugh/linuxcnc-dev/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc offset - 242 sequence - 9 repeat--1
line - -1 looking for toolchange#104
type - (null) file - (null) offset - 1073741824 sequence - 0 repeat-0
line - -1 looking for toolchange#104
type - (null) file - (null) offset - 1073741824 sequence - 0 repeat-0
line - -1 looking for toolchange#104
type - O_if file - /home/andypugh/linuxcnc-dev/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc offset - 384 sequence - 0 repeat--1
line - -1 looking for toolchange#105
type - (null) file - (null) offset - 1073741824 sequence - 0 repeat-0
line - -1 looking for toolchange#105
type - (null) file - (null) offset - 1073741824 sequence - 0 repeat-0
line - -1 looking for toolchange#105
type - O_if file - /home/andypugh/linuxcnc-dev/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc offset - 539 sequence - 0 repeat--1
line - -1 looking for toolchange#100
type - O_if file - /home/andypugh/linuxcnc-dev/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc offset - 242 sequence - 9 repeat--1
line - -1 looking for toolchange#200
type - O_if file - /home/andypugh/linuxcnc-dev/configs/sim/axis/vismach/VMC_toolchange/toolchange.ngc offset - 647 sequence - 29 repeat--1
emc/task/emctask.cc 389: interp_error: 9: duplicate O-word label - already defined in line 30: 'O200 IF [#<selected_tool> GT 0]'
9: duplicate O-word label - already defined in line 30: 'O200 IF [#<selected_tool> GT 0]'