X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux queens 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 i686
Build Date: 09 April 2009 02:10:02AM
xorg-server 2:1.6.0-0ubuntu14 (buildd@rothera.buildd)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed May 27 10:28:06 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Display 1" (0)
(**) | |-->Monitor "Samsung SyncMaster 172T"
(**) | |-->Device "Matrox P650 1"
(**) |-->Screen "Display 2" (1)
(**) | |-->Monitor "Samsung SyncMaster 172B"
(**) | |-->Device "Matrox P650 2"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) Option "DontZap" "FALSE"
(**) Option "Xinerama" "on"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) Xinerama: enabled
(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID".
Entry deleted from font path.
(Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID").
(WW) The directory "/usr/lib/X11/fonts/misc" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/Speedo" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Generic Keyboard
(WW) Disabling Configured Mouse
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) Matrox Graphics, Inc. Millenium P650/P750 rev 2, Mem @ 0xf8000000/67108864, 0xfc000000/8192, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="Matrox Graphics Inc. - x86_32 - Release v1.4.7 - May 11 04:11:19 2009"
compiled for 7.4.9.900, module version = 1.4.7
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "mtx"
(II) Loading /usr/lib/xorg/modules/drivers//mtx_drv.so
(II) Module mtx: vendor="Matrox Graphics Inc. - x86_32 - Release v1.4.7 - May 11 04:08:43 2009"
compiled for 7.4.9.900, module version = 1.4.7
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) Loading extension MTXGamma
(II) MTX: Driver for Matrox chipsets: P-Series Family A, P-Series Family B,
P-Series Family C, P-Series Family D, P-Series Family E
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Setting vga for screen 1.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(--) MTX(0): Linear framebuffer at 0xF8000000
(--) MTX(0): MMIO registers at 0xFC000000
(II) MTX(0): Device Id [2537] Subsys Id [1830]
(II) MTX(0): Device Name [P650 64MB]
(--) MTX(0): Total Video RAM: 65536 kByte
(**) MTX(0): Depth 16, (--) framebuffer bpp 16
(==) MTX(0): Default visual is TrueColor
(**) MTX(0): Depth 16, (--) framebuffer bpp 16
(==) MTX(0): Default visual is TrueColor
(==) MTX(0): RGB weight 565
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) MTX(0): Initializing int10
(II) MTX(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) MTX(0): MTX Monitor info: 0x9e8de38
(II) MTX(0): Manufacturer: SAM Model: 6f Serial#: 1297035575
(II) MTX(0): Year: 2004 Week: 12
(II) MTX(0): EDID Version: 1.3
(II) MTX(0): Digital Display Input
(II) MTX(0): Max Image Size [cm]: horiz.: 34 vert.: 27
(II) MTX(0): Gamma: 2.40
(II) MTX(0): DPMS capabilities: Off
(II) MTX(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) MTX(0): First detailed timing is preferred mode
(II) MTX(0): redX: 0.634 redY: 0.354 greenX: 0.304 greenY: 0.581
(II) MTX(0): blueX: 0.143 blueY: 0.102 whiteX: 0.318 whiteY: 0.339
(II) MTX(0): Supported VESA Video Modes:
(II) MTX(0): 720x400@70Hz
(II) MTX(0): 640x480@60Hz
(II) MTX(0): 640x480@67Hz
(II) MTX(0): 640x480@72Hz
(II) MTX(0): 640x480@75Hz
(II) MTX(0): 800x600@56Hz
(II) MTX(0): 800x600@60Hz
(II) MTX(0): 800x600@72Hz
(II) MTX(0): 800x600@75Hz
(II) MTX(0): 832x624@75Hz
(II) MTX(0): 1024x768@60Hz
(II) MTX(0): 1024x768@70Hz
(II) MTX(0): 1024x768@75Hz
(II) MTX(0): 1280x1024@75Hz
(II) MTX(0): 1152x870@75Hz
(II) MTX(0): Manufacturer's mask: 0
(II) MTX(0): Supported Future Video Modes:
(II) MTX(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) MTX(0): #1: hsize: 1024 vsize 768 refresh: 60 vid: 16481
(II) MTX(0): #2: hsize: 800 vsize 600 refresh: 60 vid: 16453
(II) MTX(0): #3: hsize: 640 vsize 480 refresh: 60 vid: 16433
(II) MTX(0): #4: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) MTX(0): #5: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) MTX(0): #6: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) MTX(0): #7: hsize: 640 vsize 480 refresh: 75 vid: 20273
(II) MTX(0): Supported additional Video Mode:
(II) MTX(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) MTX(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) MTX(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) MTX(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) MTX(0): Monitor name: SyncMaster
(II) MTX(0): Serial No: HMEX304343
(II) MTX(0): EDID (in hex):
(II) MTX(0): 00ffffffffffff004c2d6f0037314f4d
(II) MTX(0): 0c0e010380221b8c2a6f8ba25a4d9424
(II) MTX(0): 1a5156bfef808180614045403140818f
(II) MTX(0): 614f454f314f302a009851002a403070
(II) MTX(0): 1300520e1100001e000000fd00384b1e
(II) MTX(0): 510e000a202020202020000000fc0053
(II) MTX(0): 796e634d61737465720a2020000000ff
(II) MTX(0): 00484d45583330343334330a20200082
(II) MTX(0): EDID vendor "SAM", prod id 111
(II) MTX(0): Using hsync ranges from config file
(II) MTX(0): Using vrefresh ranges from config file
(II) MTX(0): Printing DDC gathered Modelines:
(II) MTX(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) MTX(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) MTX(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) MTX(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) MTX(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) MTX(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) MTX(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) MTX(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) MTX(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) MTX(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) MTX(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) MTX(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) MTX(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) MTX(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) MTX(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) MTX(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) MTX(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) MTX(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) MTX(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) MTX(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) MTX(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) MTX(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) MTX(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) MTX(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) MTX(0): end of MTX Monitor info
(II) MTX(0): Monitor maximum supported pixel clock is 140 MHz
(II) MTX(0): Monitor Input Type = 2
(==) MTX(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) MTX(0): Acceleration is enabled
(II) MTX(0): Using hardware cursor
(II) MTX(0): Detecting Digital Output [1]
(II) MTX(0): Digital is available [1]
(II) MTX(0): -- Using monitors max pixel clock to verify modes. --
(II) MTX(0): -- To override use 'Option "OCC"' in the device section. --
(II) MTX(0): Samsung SyncMaster 172T: Using hsync range of 30.00-82.00 kHz
(II) MTX(0): Samsung SyncMaster 172T: Using vrefresh range of 56.00-76.00 Hz
(II) MTX(0): Samsung SyncMaster 172T: Using maximum pixel clock of 140.00 MHz
(II) MTX(0): Clock range: 12.00 to 140.00 MHz
(II) MTX(0): Not using default mode "640x350" (vrefresh out of range)
(II) MTX(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "640x400" (vrefresh out of range)
(II) MTX(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "720x400" (vrefresh out of range)
(II) MTX(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "640x480" (vrefresh out of range)
(II) MTX(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "800x600" (vrefresh out of range)
(II) MTX(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1024x768" (vrefresh out of range)
(II) MTX(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1024x768" (vrefresh out of range)
(II) MTX(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1152x864" (vrefresh out of range)
(II) MTX(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1152x864" (vrefresh out of range)
(II) MTX(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "960x540" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(**) MTX(0): Display dimensions: (340, 270) mm
(**) MTX(0): DPI set to (95, 96)
(--) MTX(0): Virtual size is 1280x1024 (pitch 2048)
(**) MTX(0): *Driver mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) MTX(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) MTX(0): Total Memory for Onscreen and Offscreen : 0x3c0000
(II) MTX(0): Cursor Offset at 0x00000000
(II) MTX(0): Cursor Aperture at 0x00000000
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) MTX(0): Busmastering is enabled
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Reloading /usr/lib/xorg/modules//libvgahw.so
(--) MTX(1): Linear framebuffer at 0xF8000000
(--) MTX(1): MMIO registers at 0xFC000000
(II) MTX(1): Device Id [2537] Subsys Id [1830]
(II) MTX(1): Device Name [P650 64MB]
(--) MTX(1): Total Video RAM: 65536 kByte
(**) MTX(1): Depth 16, (--) framebuffer bpp 16
(==) MTX(1): Default visual is TrueColor
(**) MTX(1): Depth 16, (--) framebuffer bpp 16
(==) MTX(1): Default visual is TrueColor
(==) MTX(1): RGB weight 565
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) MTX(1): MTX Monitor info: 0x9e8a978
(II) MTX(1): Manufacturer: SAM Model: 6a Serial#: 1297035575
(II) MTX(1): Year: 2003 Week: 4
(II) MTX(1): EDID Version: 1.3
(II) MTX(1): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) MTX(1): Sync: Separate Composite SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
(II) MTX(1): Max Image Size [cm]: horiz.: 34 vert.: 27
(II) MTX(1): Gamma: 2.40
(II) MTX(1): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) MTX(1): First detailed timing is preferred mode
(II) MTX(1): redX: 0.634 redY: 0.354 greenX: 0.304 greenY: 0.581
(II) MTX(1): blueX: 0.143 blueY: 0.102 whiteX: 0.318 whiteY: 0.339
(II) MTX(1): Supported VESA Video Modes:
(II) MTX(1): 720x400@70Hz
(II) MTX(1): 640x480@60Hz
(II) MTX(1): 640x480@67Hz
(II) MTX(1): 640x480@72Hz
(II) MTX(1): 640x480@75Hz
(II) MTX(1): 800x600@56Hz
(II) MTX(1): 800x600@60Hz
(II) MTX(1): 800x600@72Hz
(II) MTX(1): 800x600@75Hz
(II) MTX(1): 832x624@75Hz
(II) MTX(1): 1024x768@60Hz
(II) MTX(1): 1024x768@70Hz
(II) MTX(1): 1024x768@75Hz
(II) MTX(1): 1280x1024@75Hz
(II) MTX(1): 1152x870@75Hz
(II) MTX(1): Manufacturer's mask: 0
(II) MTX(1): Supported Future Video Modes:
(II) MTX(1): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) MTX(1): #1: hsize: 1024 vsize 768 refresh: 60 vid: 16481
(II) MTX(1): #2: hsize: 800 vsize 600 refresh: 60 vid: 16453
(II) MTX(1): #3: hsize: 640 vsize 480 refresh: 60 vid: 16433
(II) MTX(1): #4: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) MTX(1): #5: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) MTX(1): #6: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) MTX(1): #7: hsize: 640 vsize 480 refresh: 75 vid: 20273
(II) MTX(1): Supported additional Video Mode:
(II) MTX(1): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) MTX(1): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) MTX(1): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) MTX(1): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) MTX(1): Monitor name: SyncMaster
(II) MTX(1): Serial No: H4LW101938
(II) MTX(1): EDID (in hex):
(II) MTX(1): 00ffffffffffff004c2d6a0037314f4d
(II) MTX(1): 040d01030f221b8cea6f8ba25a4d9424
(II) MTX(1): 1a5156bfef808180614045403140818f
(II) MTX(1): 614f454f314f302a009851002a403070
(II) MTX(1): 1300520e1100001e000000fd00384b1e
(II) MTX(1): 510e000a202020202020000000fc0053
(II) MTX(1): 796e634d61737465720a2020000000ff
(II) MTX(1): 0048344c573130313933380a2020004f
(II) MTX(1): EDID vendor "SAM", prod id 106
(II) MTX(1): Using hsync ranges from config file
(II) MTX(1): Using vrefresh ranges from config file
(II) MTX(1): Printing DDC gathered Modelines:
(II) MTX(1): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) MTX(1): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) MTX(1): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) MTX(1): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) MTX(1): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) MTX(1): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) MTX(1): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) MTX(1): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) MTX(1): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) MTX(1): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) MTX(1): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) MTX(1): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) MTX(1): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) MTX(1): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) MTX(1): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) MTX(1): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) MTX(1): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) MTX(1): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) MTX(1): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) MTX(1): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) MTX(1): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) MTX(1): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) MTX(1): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) MTX(1): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) MTX(1): end of MTX Monitor info
(II) MTX(1): Monitor maximum supported pixel clock is 140 MHz
(II) MTX(1): Monitor Input Type = 1
(==) MTX(1): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Reloading /usr/lib/xorg/modules//libxaa.so
(II) MTX(1): Acceleration is enabled
(II) MTX(1): Using hardware cursor
(II) MTX(1): -- Using monitors max pixel clock to verify modes. --
(II) MTX(1): -- To override use 'Option "OCC"' in the device section. --
(II) MTX(1): Samsung SyncMaster 172B: Using hsync range of 30.00-82.00 kHz
(II) MTX(1): Samsung SyncMaster 172B: Using vrefresh range of 56.00-76.00 Hz
(II) MTX(1): Samsung SyncMaster 172B: Using maximum pixel clock of 140.00 MHz
(II) MTX(1): Clock range: 12.00 to 140.00 MHz
(II) MTX(1): Not using default mode "640x350" (vrefresh out of range)
(II) MTX(1): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "640x400" (vrefresh out of range)
(II) MTX(1): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "720x400" (vrefresh out of range)
(II) MTX(1): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "640x480" (vrefresh out of range)
(II) MTX(1): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "800x600" (vrefresh out of range)
(II) MTX(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1024x768" (vrefresh out of range)
(II) MTX(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1024x768" (vrefresh out of range)
(II) MTX(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1152x864" (vrefresh out of range)
(II) MTX(1): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1152x864" (vrefresh out of range)
(II) MTX(1): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) MTX(1): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1680x1050" (monitor doesn't support reduced blanking)
(II) MTX(1): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1920x1080" (monitor doesn't support reduced blanking)
(II) MTX(1): Not using default mode "960x540" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(**) MTX(1): Display dimensions: (340, 270) mm
(**) MTX(1): DPI set to (95, 96)
(--) MTX(1): Virtual size is 1280x1024 (pitch 2048)
(**) MTX(1): *Driver mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) MTX(1): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) MTX(1): Total Memory for Onscreen and Offscreen : 0x3c0000
(II) MTX(1): Cursor Offset at 0x00000000
(II) MTX(1): Cursor Aperture at 0x00000000
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Reloading /usr/lib/xorg/modules//libfb.so
(II) MTX(1): Busmastering is enabled
(II) do I need RAC? Yes, I do.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) MTX(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(WW) MTX(0): Cannot read colourmap from VGA. Will restore with default
(WW) MTX(0): Cannot stop Matrox xform.
(WW) MTX(0): Error occured while starting the Matrox xform.
(II) MTX(0): Cursor Aperture location 0x680000.
(II) MTX(0): Cursor Surface location 0x1f60000.
(II) MTX(0): Parhelia device started.
(II) MTX(0): 1 monitors configured.
(II) MTX(0): Monitor 0 (0,0)-(1280,1024)
(==) MTX(0): Default visual is TrueColor
(II) MTX(0): Using 512 lines for offscreen memory.
(II) MTX(0): Memory manager initialized to (0,0) (1280,1536)
(II) MTX(0): Largest offscreen area available: 1280 x 512
(II) MTX(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
CPU to Screen color expansion
Solid Lines
Driver provided ScreenToScreenBitBlt replacement
Driver provided FillSolidRects replacement
Driver provided FillSolidSpans replacement
Driver provided WritePixmap replacement
Driver provided ReadPixmap replacement
Setting up tile and stipple cache:
20 128x128 slots
5 256x256 slots
(==) MTX(0): Backing store disabled
(==) MTX(0): Silken mouse enabled
(II) MTX(0): Initializing HW cursor
(**) Option "dpms"
(**) MTX(0): DPMS enabled
(II) MTX(0): Using overlay for video
(==) RandR enabled
(II) MTX(1): vgaHWGetIOBase: hwp->IOBase is 0x03b0, hwp->PIOOffset is 0x0000
(WW) MTX(1): Cannot stop Matrox xform.
(WW) MTX(1): Error occured while starting the Matrox xform.
(II) MTX(1): Cursor Aperture location 0x680000.
(II) MTX(1): Cursor Surface location 0x1f60000.
(II) MTX(1): Parhelia device started.
(II) MTX(1): 1 monitors configured.
(II) MTX(1): Monitor 0 (0,0)-(1280,1024)
(==) MTX(1): Default visual is TrueColor
(II) MTX(1): Using 512 lines for offscreen memory.
(II) MTX(1): Memory manager initialized to (0,0) (1280,1536)
(II) MTX(1): Largest offscreen area available: 1280 x 512
(II) MTX(1): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
CPU to Screen color expansion
Solid Lines
Driver provided ScreenToScreenBitBlt replacement
Driver provided FillSolidRects replacement
Driver provided FillSolidSpans replacement
Driver provided WritePixmap replacement
Driver provided ReadPixmap replacement
Setting up tile and stipple cache:
20 128x128 slots
5 256x256 slots
(==) MTX(1): Backing store disabled
(==) MTX(1): Silken mouse enabled
(II) MTX(1): Initializing HW cursor
(**) Option "dpms"
(**) MTX(1): DPMS enabled
(II) MTX(1): Using overlay for video
(==) RandR enabled
(II) Entity 0 shares no resources
(II) Entity 1 shares no resources
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device ImExPS/2 Generic Explorer Mouse
(**) ImExPS/2 Generic Explorer Mouse: always reports core events
(**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event5"
(II) ImExPS/2 Generic Explorer Mouse: Found 5 mouse buttons
(II) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
(II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse
(**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
(**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE)
(**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
(**) ImExPS/2 Generic Explorer Mouse: (accel) filter chain progression: 2.00
(**) ImExPS/2 Generic Explorer Mouse: (accel) filter stage 0: 20.00 ms
(**) ImExPS/2 Generic Explorer Mouse: (accel) set acceleration profile 0
(II) Screen 0 shares mem & io resources
(II) Screen 1 shares mem & io resources
(II) MTX(0): Parhelia device stopped.
(II) MTX(1): Parhelia device stopped.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Screen 0 shares mem & io resources
(II) Screen 1 shares mem & io resources
(II) Screen 0 shares mem & io resources
(II) Screen 1 shares mem & io resources
(II) MTX(0): Cursor Aperture location 0x680000.
(II) MTX(0): Cursor Surface location 0x1f60000.
(II) MTX(0): Parhelia device started.
(II) MTX(1): Cursor Aperture location 0x680000.
(II) MTX(1): Cursor Surface location 0x1f60000.
(II) MTX(1): Parhelia device started.
(II) Entity 0 shares no resources
(II) Entity 1 shares no resources
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) ImExPS/2 Generic Explorer Mouse: Device reopened after 1 attempts.
miPointerConstrainCursor: Invalid input device pointer
miPointerConstrainCursor: Invalid input device pointer
(II) Screen 0 shares mem & io resources
(II) Screen 1 shares mem & io resources
(II) MTX(0): Parhelia device stopped.
(II) MTX(1): Parhelia device stopped.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Screen 0 shares mem & io resources
(II) Screen 1 shares mem & io resources
(II) Screen 0 shares mem & io resources
(II) Screen 1 shares mem & io resources
(II) MTX(0): Cursor Aperture location 0x680000.
(II) MTX(0): Cursor Surface location 0x1f60000.
(II) MTX(0): Parhelia device started.
(II) MTX(1): Cursor Aperture location 0x680000.
(II) MTX(1): Cursor Surface location 0x1f60000.
(II) MTX(1): Parhelia device started.
(II) Entity 0 shares no resources
(II) Entity 1 shares no resources
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) ImExPS/2 Generic Explorer Mouse: Device reopened after 1 attempts.
(II) Screen 0 shares mem & io resources
(II) Screen 1 shares mem & io resources
(II) MTX(0): Parhelia device stopped.
(II) MTX(1): Parhelia device stopped.
Backtrace:
0: /usr/X11R6/bin/X(xorg_backtrace+0x3b) [0x813518b]
1: /usr/X11R6/bin/X(xf86SigHandler+0x55) [0x80c7be5]
2: [0xb800f400]
3: /usr/X11R6/bin/X [0x811ebc5]
4: /usr/X11R6/bin/X [0x8095381]
5: /usr/X11R6/bin/X [0x80971ea]
6: /usr/X11R6/bin/X(CheckMotion+0x9c) [0x8098b3c]
7: /usr/X11R6/bin/X(ProcessOtherEvent+0x2cf) [0x818625f]
8: /usr/X11R6/bin/X(XkbHandleActions+0x24f) [0x81af33f]
9: /usr/X11R6/bin/X(XkbProcessKeyboardEvent+0xa3) [0x81afb03]
10: /usr/X11R6/bin/X [0x81a7cba]
11: /usr/X11R6/bin/X [0x81a7d77]
12: /usr/X11R6/bin/X [0x8132747]
13: /usr/X11R6/bin/X(WaitForSomething+0x5cf) [0x8132e1f]
14: /usr/X11R6/bin/X(Dispatch+0x7e) [0x808d2be]
15: /usr/X11R6/bin/X(main+0x3bd) [0x80722ed]
16: /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xe5) [0xb7bdd775]
17: /usr/X11R6/bin/X [0x80717a1]
Saw signal 11. Server aborting.
(II) ImExPS/2 Generic Explorer Mouse: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
ddxSigGiveUp: Closing log